CAVS Publications

Search Publication Listings
Publication Type:
Research Working Groups:

Publications for: Mark Fredrick Horstemeyer
Book
Jordon, J. B., Grantham, J., & Horstemeyer, M. (2014). Monotonic and Fatigue Behavior of Mg Alloy Friction Stir Spot Welds: An International Benchmark Test. In S.N. Mathaudhu, A.L. Luo, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens (Eds.), Magnesium Front End Research and Development. DOI:10.1002/9781118859803.ch89.

Horstemeyer, M. (2013). Materials of the Future: From Business Suits to Space Suits. In T. Critchlow and K. Kleese van Dam (Eds.), Data-Intensive Science. Chapman and Hall/CRC. 103-120.

Horstemeyer, M. (2012). Integrated Computational Materials Engineering (ICME) for Metals: Reinvigorating Engineering Design with Science. Integrated Computational Materials Engineering (ICME) for Metals: Reinvigorating Engineering Design with Science ISBN: 978-1-118-02252-8. Hoboken, NJ: Wiley Press. [Abstract]

Tschopp, M. A., Solanki, K.N., & Horstemeyer, M. (2011). A Generalized Framework for Quantifying Material Structure-Property Relationships and Uncertainties: Applicability to ICME. Tools Developed and Needed to Realize the Vision of Integrated Computational Materials Engineering. ASM International.

Moitra, A., Kim, S., Kim, S., Park, S. J., German, R., & Horstemeyer, M. (2010). Atomistic Scale Study on Effect of Crystalline Misalignment on Densification during Sintering Nano Scale Tungsten Powder. Advances in Sintering Science and Technology. Wiley Interscience. [Document Site]

Horstemeyer, M. (2009). Multiscale Modeling: A Review. In J. Leszczynski and M.K. Shukla (Eds.), Practical Aspects of Computational Chemistry. Springer Science. 87-135.

Horstemeyer, M. (2005). Chapter 3. Mesoscale-Macroscale Continuum Modeling: Introduction. In S. Yip, Springer (Eds.), Handbook for Materials Modeling. The Netherlands: 3300 AA Dordrecht.

Bammann, D., Horstemeyer, M., Chiesa, M. L., & Weingarten, L. I. (1993). Failure in Ductile Materials Using Finite Element Methods. In T. Wierzbicki and N. Jones (Eds.), Structural Crashworthiness and Failure. University of Liverpool, England: Elsevier Applied Science.

Horstemeyer, M., Potirniche, G., & Marin, E. (). Chapter 3. Mesoscale-Macroscale Continuum Modeling: Crystal Plasticity. In S. Yip, Springer (Ed.), Handbook for Materials Modeling. The Netherland: 3300 AA Dordrecht.

Book Chapter
Carino, R.L., & Horstemeyer, M. (2016). Case Studies in Using MATLAB to Build Model Calibration Tools for Multiscale Modeling. In Jan Valdman (Ed.), Applications from Engineering with MATLAB Concepts, ISBN 978-953-51-2460-3, Print ISBN 978-953-51-2459-7. InTechOpen. 141-158. DOI:10.5772/62348. [Abstract] [Document Site]

Whittington, W. R., Oppedal, A. L., Francis, D.K., & Horstemeyer, M. (2016). Robust Intermediate Strain Rate Experimentation Using the Serpentine Transmitted Bar. In S. Boussuyt, G. Schajer, A. Carpinteri (Eds.), Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9. Springer. 167--173. [Abstract]

Peer-Reviewed Journals
Hughes, J. M., Lugo, M., Bouvard, J.-L., Mclntyre, T., & Horstemeyer, M. (2017). Cyclic Behavior and Modeling of Small Fatigue Cracks of a Polycarbonate Polymer. International Journal of Fatigue. Elsevier. 99, 78-86. DOI:10.1016/j.ijfatigue.2016.12.012. [Abstract] [Document] [Document Site]

Lee, N, Williams, L. N., Mun, S., Rhee, H., Prabhu, R., Bhattarai, K. R., & Horstemeyer, M. (2017). Stress Wave Mitigation at Suture Interfaces. Biomedical Physics & Engineering Express. IOP Publishing Ltd. 3, 035025. DOI:10.1088/2057-1976/aa777e. [Abstract] [Document] [Document Site]

Paliwal, B., Lawrimore, W. B., Chandler, M. Q., & Horstemeyer, M. (2017). Nanomechanical Modeling of Interfaces of Polyvinyl Alcohol (PVA)/clay Nanocomposite. Philosophical Magazine. Taylor & Francis. 97(15), 1179-1208. DOI:10.1080/14786435.2017.1293859. [Abstract] [Document Site]

Brauer, S. A., Whittington, W. R., Li, B., Rhee, H., Allison, P., Crane, C. K., & Horstemeyer, M. (2017). Strain Rate and Stress-State Dependence of Gray Cast Iron. Journal of Engineering Materials and Technology. American Society of Mechanical Engineers. 139(2), 021013. DOI:10.1115/1.4035616. [Abstract] [Document] [Document Site]

Paliwal, B., Hammi, Y., Moser, R. D., & Horstemeyer, M. (2017). A Three-invariant Cap-plasticity Damage Model for Cementitious Materials. International Journal of Solids and Structures. Elsevier. 108, 186-202. DOI:10.1016/j.ijsolstr.2016.12.015. [Abstract] [Document] [Document Site]

Rush, G. A., Prabhu, R., Rush, G. A., III., Williams, L. N., & Horstemeyer, M. (2017). Modified Drop Tower Impact Tests for American Football Helmets. JoVE (Journal of Visualized Experiments). -(120), e53929-e53929. DOI:10.3791/53929. [Abstract] [Document Site]

Deang, J., Allison, P., Prabhu, R., Williams, L. N., Rhee, H., Whittington, W. R., Perkins, E. J., Bruce, S. M., & Horstemeyer, M. (2017). Constitutive Behaviour of Paddlefish (Polyodon Spathula) Cartilage. Bioinspired, Biomimetic and Nanobiomaterials. Thomas Telford Ltd. -, 1-8. DOI:10.1680/jbibn.16.00046. [Abstract] [Document Site]

Mun, S., Bowman, A., Nouranian, S., Gwaltney, S. R., Baskes, M. I., & Horstemeyer, M. (2017). Interatomic Potential for Hydrocarbons on the Basis of the Modified Embedded-Atom Method with Bond Order (MEAM-BO). The Journal of Physical Chemistry A. ACS Publications. 121(7), 1502–1524. DOI:10.1021/acs.jpca.6b11343. [Document]

Johnson, K. L., Trim, M. W., Francis, D.K., Whittington, W. R., Miller, J. A., Bennett, C. E., & Horstemeyer, M. (2017). Moisture, Anisotropy, Stress State, and Strain Rate Effects on Bighorn Sheep Horn Keratin Mechanical Properties. Acta biomaterialia. Elsevier. 48, 300-308. DOI:10.1016/j.actbio.2016.10.033. [Abstract] [Document] [Document Site]

Johnson, K., Chowdhury, S., Lawrimore, W., Mao, Y., Mehmani, A., Prabhu, R., Rush, G. A., & Horstemeyer, M. (2016). Constrained Topological Optimization of a Football Helmet Facemask Based on Brain Response. Materials & Design. 111, 108-118.

Huddleston, B. D., Dickel, D. E., Horstemeyer, M., Williams, N., Danielson, K., & Hammi, Y. (2016). Damage Progression and Fragmentation in Atomistic, Single Crystal Copper at High Strain Rates. Solid State Phenomena. Trans Tech Publications. 258, 49-52. DOI:10.4028/www.scientific.net/SSP.258.49. [Abstract] [Document Site]

Hammi, Y., Stone, T.W., Paliwal, B., Allison, P. G., & Horstemeyer, M. (2016). Smooth Yield Surface Constitutive Modeling for Granular Materials. Journal of Engineering Materials and Technology. American Society of Mechanical Engineers. 139(1), 011010. DOI:10.1115/1.4034987. [Abstract] [Document] [Document Site]

Lee, N, Horstemeyer, M., Prabhu, R., Liao, J., Rhee, H., Hammi, Y., & Williams, L. N. (2016). The Geometric Effects of a Woodpeckers Hyoid Apparatus for Stress Wave Mitigation. Bioinspiration and Biomemetics. 11, 1748-3190. DOI:10.1088/1748-3190/11/6/066004. [Document Site]

Dickel, D. E., Tenev, T. G., Gullett, P., & Horstemeyer, M. (2016). The Notion of a Plastic Material Spin in Atomistic Simulations. Modelling and Simulation in Materials Science and Engineering. IOP. 24, 17. DOI:10.1088/0965-0393/24/8/085010.

Lawrimore, W. B., Francis, D.K., Bouvard, J.-L., Hammi, Y., & Horstemeyer, M. (2016). A Mesomechanics Parametric Finite Element Study of Damage Growth and Coalescence in Polymers Using an Elastoviscoelastic-Viscoplastic Internal State Variable Model. Mechanics of Materials. 1, 83-95.

Bouvard, J.-L., Denton, B., Freire, L., & Horstemeyer, M. (2016). Modeling the Mechanical Behavior and Impact Properties of Polypropylene and Copolymer Polypropylene. Journal of Polymer Research. 4, 1-19.

Lawrimore, W. B., Horstemeyer, M., Johnson, K. L., Paliwal, B., & Chandler, M. Q. (2016). Hierarchical Multiscale Modeling of Polyvinyl Alcohol/Montmorillonite Nanocomposites. Polymer. 99, 386-398.

Murphy, M. A., Horstemeyer, M., Gwaltney, S. R., Stone, T.W., LaPlaca, M., Liao, J., Williams, L. N., & Prabhu, R. (2016). Nanomechanics of Phospholipid Bilayer Failure under Strip Biaxial Stretching Using Molecular Dynamics. Modelling and Simulation in Materials Science and Engineering. 24(5), 055008. DOI:10.1088/0965-0393/24/5/055008.

Yadollahi, A., Shamsaei, N., Hammi, Y., & Horstemeyer, M. (2016). Quantifying Tensile Damage Evolution in Additive Manufactured Austenitic Stainless Steels. Materials Science & Engineering A. Elsevier. 657, 399–405. DOI:10.1016/j.msea.2016.01.067.

McClelland, Z., Li, B., Horstemeyer, S., Brauer, S. A., Adedoyin, A., Hector, L. G., & Horstemeyer, M. (2015). Geometrically Necessary Twins in Bending of a Magnesium Alloy. Materals Science and Engineering. A(645), 298-305.

Nouranian, S., Gwaltney, S. R., Baskes, M. I., Tschopp, M. A., & Horstemeyer, M. (2015). Simulations of Tensile Bond Rupture in Single Alkane Molecules Using Reactive Interatomic Potentials. Chemical Physics Letters. 635, 278-284.

Clemmer, J., Prabhu, R., Chen, J., Colebeck, E., Priddy, L. B., McCollum, M., Brazile, B. L., Whittington, W. R., Wardlaw, J. L., Rhee, H., Horstemeyer, M., Williams, L. N., & Liao, J. (2015). Experimental Observation of High Strain Rate Responses of Porcine Brain, Liver, and Tendon. Journal of Mechanics in Medicine and Biology. 1650032, 1-14. DOI:10.1142/S0219519416500329. [Abstract] [Document Site]

Prabhu, R., Whittington, W. R., Patnaik, S.S, Mao, Y., Begonia, M. T., Williams, L. N., Liao, J., & Horstemeyer, M. (2015). A Coupled Experiment-finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials. JoVE (Journal of Visualized Experiments). V., pg.

Prabhu, R., Whittington, W. R., Patnaik, S. S., Mao, Y., Liao, J., Williams, L. N., Begonia, M., & Horstemeyer, M. (2015). A Coupled Experiment-Finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials. JoVE. Cambridge, MA: JoVE Corp.. 1(99), e51545. DOI:10.3791/51545. [Abstract]

Whittington, W. R., Oppedal, A. L., Francis, D.K., & Horstemeyer, M. (2015). A Novel Intermediate Strain Rate Testing Device: The Serpentine Transmitted Bar. International Journal of Imact Engineering. 81, 1-7. DOI:10.1016/j.ijimpeng.2015.02.009..

Whittington, W. R., Oppedal, A. L., Francis, D.K., & Horstemeyer, M. (2015). A Novel Intermediate Strain Rate Testing Device: The Serpentine Transmitted Bar. International Journal of Impact Engineering. Elsevier. 81, 1-7. DOI:10.1016/j.ijimpeng.2015.02.009. [Abstract] [Document Site]

Li, B., McClelland, Z., Horstemeyer, S., Aslam, I., Wang, P., & Horstemeyer, M. (2015). Time Dependent Springback of a Magnesium Alloy. Materials and Design. 66 B, 575-580.

Li, B., McClelland, Z., Horstemeyer, S., Aslam, I., Wang, P., & Horstemeyer, M. (2015). Time Dependent Springback of a Magnesium Alloy. Materials and Design. 66(B), 575-580. DOI:10.1016/j.matdes.2014.03.035.

Horstemeyer, M., Hughes, J. M., Sukhija, N., Lawrimore, W. B., Kim, S., Carino, R.L., & Baskes, M. I. (2015). Hierarchical Bridging Between Ab Initio and Atomistic Level Computations: Calibrating the Modified Embedded-Atom Method (MEAM) Potential (Part A). Journal of Materials. Springer US. 67(1), 143-147. DOI:10.1007/s11837-014-1244-0. [Abstract] [Document Site]

Hughes, J. M., Horstemeyer, M., Carino, R.L., Sukhija, N., Lawrimore, W. B., Kim, S., & Baskes, M. I. (2015). Hierarchical Bridging Between Ab Initio and Atomistic Level Computations: Sensitivity and Uncertainty Analysis for the Modified Embedded-Atom Method (MEAM) Potential (Part B). Journal of Material. Springer US. 67(1), 148-153. DOI:10.1007/s11837-014-1205-7. [Abstract] [Document Site]

Moitra, A., Kim, S., & Horstemeyer, M. (2014). Solute Effect on Basal and Prismatic Slip Systems in Mg. J. Phys. Condens.. 26(44), 1-2.

Deng, X., Chen, S. A., Prabhu, R., Jiang, Y., Mao, Y., & Horstemeyer, M. (2014). Finite Element Analysis of the Human Head Under Side Car Crash Impacts at Different Speeds. J Mech Med Bio. Singapore: World Scientific. 14(6), 1440002.

Francis, D.K., Bouvard, J.-L., Hammi, Y., & Horstemeyer, M. (2014). Formulation of a Damage Internal State Variable Model for Amorphous Glassy Polymers. International Journal of Solids and Structures. 51(15-16), 2765–2776. DOI:10.1016/j.ijsolstr.2014.03.025.

Lee, N, Horstemeyer, M., Rhee, H., Nabors, B., Liao, J., & Williams, L. N. (2014). Hierarchical Multiscale Structure-property Relationships of the Red-bellied Woodpecker (Melanerpes carolinus) Beak. Journal of the Royal Society Interface. 11(96). DOI:10.1098/rsif.2014.0274.

Lugo, M., Fountain, J. E., Hughes, J. M., Bouvard, J.-L., & Horstemeyer, M. (2014). Microstructure-based Fatigue Model of an Acrylonitrile Butadiene Styrene (ABS) Copolymer. Journal of Applied Polymer Science. Wiley. 131(20), 1-12. [Abstract]

Liao, M., Li, B., & Horstemeyer, M. (2014). Interaction Between Basal Slip and a Mg17Al12 Precipitate in Magnesium. Metallurgical and Materials Transactions. 45A, 3661-3669.

Jordon, J. B., & Horstemeyer, M. (2014). Microstructure-sensitive Fatigue Modeling of AISI 4140 Steel. Journal of Engineering Materials and Technology of the ASME. ASME. 136(2), 021004.

Rhee, H., Tucker, M. T., Whittington, W. R., Horstemeyer, M., & Lim, H. (2014). Structure-property Responses of Bio-inspired Synthetic Foams at Low and High Strain Rates. Science and Engineering of Composite Materials. 22(4), 365-373. DOI:10.1515/secm-2013-0238.

Liyanage, Laalitha S. I., Kim, S., Houze, J., Kim, S., Tschopp, M. A., Baskes, M. I., & Horstemeyer, M. (2014). Structural, Elastic, and Thermal Properties of Cementite (Fe3C) Calculated Using a Modified Embedded Atom Method. PHYSICAL REVIEW B. APS. 89(9), 94102. DOI:10.1103/PhysRevB.89.094102.

Johnson, K. L., Trim, M. W., Horstemeyer, M., Lee, N, Williams, L. N., Liao, J., Rhee, H., & Prabhu, R. (2014). Geometric Effects on Stress Wave Propagation. Journal of Biomechanical Engineering. 136(2), .DOI:10.1115/1.4026320.

Nouranian, S., Tschopp, M. A., Gwaltney, S. R., Baskes, M. I., & Horstemeyer, M. (2014). An Interatomic Potential for Saturated Hydrocarbons Based on the Modified Embedded-atom Method. Physical Chemistry Chemical Physics. 16(13), 6233-6249. DOI:10.1039/c4cp00027g. [Abstract] [Document Site]

Whittington, W. R., Oppedal, A. L., Turnage, S., Hammi, Y., Rhee, H., Allison, P., Crane, C. K., & Horstemeyer, M. (2014). Capturing the Effect of Temperature, Strain Rate, and Stress State on the Plasticity and Fracture of Rolled Homogeneous Armor (RHA) Steel. Materials Science and Engineering: A. Elsevier. 594, 82-88. DOI:10.1016/j.msea.2013.11.018. [Abstract] [Document Site]

Moitra, A., Kim, S., & Horstemeyer, M. (2014). Solute Effect on the Dislocation Nucleation Mechanism in Magnesium. Acta Materialia. 75, 106-112.

Walton, C. A., Martin, H. J., Horstemeyer, M., Whittington, W. R., Horstemeyer, C. J., & Wang, P. (2013). Corrosion Stress Relaxation and Tensile Strength Effects in an Extruded AZ31 Magnesium Alloy. Corrosion Science. Elsevier. 80, 503-510.

Ma, Q., Li, B., Whittington, W. R., Oppedal, A. L., Wang, P., & Horstemeyer, M. (2013). Texture Evolution during Dynamic Recrystallization in a Magnesium Alloy at 450 Deg. Acta Materialia. Elsvier. 67, 102-115. DOI:10.1016/j.actamat.2013.12.025. [Document Site]

Walton, C. A., Horstemeyer, M., Martin, H. J., & Francis, D.K. (2013). Formulation of a Macroscale Corrosion Damage Internal State Variable Model. International Journal of Solids and Structures. Elsevier. 51(6,15), 1235-1245.

Johnson, K. L., Trim, W., Williams, L. N., Liao, J., Horstemeyer, M., & Prabhu, R. (2013). Geometric Effects on Stress Wave Propagation. ASME Journal of Biomechanical Engineering. New York, NY: ASME. 2(136), 021023. DOI:10.1115/1.4026320. [Abstract] [Document Site]

Liao, M., Li, B., & Horstemeyer, M. (2013). Interaction between Prismatic Slip and a Mg17Al12 Precipitate in Magnesium. Computational Materials Science. El Sevier. 79, 534-539.

Bernard, J. D., Jordon, J. B., Horstemeyer, M., El Kadiri, H., Baird, J., Lamb, D., & Luo, A. A. (2013). Structure-Property Relations of Cyclic Damage in a Wrought Magnesium Alloy. Scripta Materialia. Pergamon. 63(7), 751-756.

Aslam, I., Li, B., McClelland, Z., Horstemeyer, S., Ma, Q., Wang, P., & Horstemeyer, M. (2013). Three Point Bending Behavior of a ZEK100 Mg Alloy at Room Temperature. Mater Sci Eng. 590, 168-173.

Aslam, I., Li, B., McClelland, Z., Horstemeyer, S., Ma, Q., Wang, P., & Horstemeyer, M. (2013). Three-pointbendingbehaviorofaZEK100Mgalloy at Roomtemperature. Materials Science & Engineering A. 590, 168-173.

Aslam, I., Li, B., McClelland, Z., Horstemeyer, S., Ma, Q., Wang, P., & Horstemeyer, M. (2013). Three-point Bending Behavior of a ZEK100 Mg Alloy at Room Temperature. Materials Science and Engineering A. Elsevier. 590, 10, 168-173.

Song, W., Martin, H. J., Hicks, A., Seely, D., Walton, C. A., Lawrimore, W. B., Wang, P., & Horstemeyer, M. (2013). Corrosion Behaviour of Extruded AM30 Magnesium Alloy under Salt-Spray and Immersion Environments. Corrosion Science. El Sevier. 78(1), 353-368.

Horstemeyer, M., Deng, X., & Wang, J. (2013). Modification Design Method for an Enveloping Hourglass Worm Gear with Consideration of Machining and Misalignment Errors. Chinese Journal of Mechanical Engineering. Springer. 26(5), 948-956.

Oppedal, A. L., El Kadiri, H., Tomé, C. N., Vogel, S. C., & Horstemeyer, M. (2013). Anisotropy in Hexagonal Close-packed Structures: Improvements to Crystal Plasticity Approaches Applied to Magnesium Alloy. Philosophical Magazine. Taylor & Francis. 93(35), 4311-4330. DOI:10.1080/14786435.2013.827802. [Abstract] [Document Site]

Lugo, M., Jordon, J. B., Solanki, K. N., Hector, L. G., Bernard, J.D., Luo, A. A., & Horstemeyer, M. (2013). Role of Different Material Processing Methods on the Fatigue Behavior of an AZ31 Magnesium Alloy. International Journal of Fatigue. 52, 131-143.

Bernard, J.D., Jordon, J. B., Lugo, M., Hughes, J. M., Rayborn, D., & Horstemeyer, M. (2013). Observations and Modeling of the Small Fatigue Crack Behavior of an Extruded AZ61 Magnesium Alloy. International Journal of Fatigue. 52, 20-29. [Abstract]

Chandler, M. Q., Bammann, D., & Horstemeyer, M. (2013). A Continuum Model for Hydrogen-Assisted Void Nucleation in Ductile Materials. Modelling and Simulation in Materials Science and Engineering. IOP Science. 21(5), 1-18.

Deng, X., Potula, S., Grewal, H., Solanki, K.N., Tschopp, M. A., & Horstemeyer, M. (2013). Finite Element Analysis of Occupant Head Injuries: Parametric Effects of the Side Curtain Airbag Deployment Interaction with a Dummy Head in a Side Impact Crash. Accident Analysis and Prevention. 55, 232-241. DOI:10.1016/j.aap.2013.03.016. [Document Site]

Sukhija, N., Haupt, T., & Horstemeyer, M. (2013). Unifying Integrated Computational Materials Engineering Research and Education through Cyberinfrastructure. Journal of Materials Education (JOM). Denton, TX: The International Council on Materials Education. 35(1-2), 21-48.

Ma, Q., Mao, W., Li, B., Wang, P., & Horstemeyer, M. (2013). Substructure and Texture Evolution in an Annealed Aluminum Alloy at Medium Strains. Metallurgical and Materials Transactions A,. Springer. April-2013, In press. [Abstract]

Liao, M., Li, B., & Horstemeyer, M. (2013). Unstable Dissociation of a Prismatic Dislocation in Magnesium. Scripta Materialia. Elsevier. 69, 246-249.

Zhang, X., Tschopp, M. A., Horstemeyer, M., Shi, S. Q., & Cao, J. (2013). Mechanical Properties of Amorphous Cellulose Using Molecular Dynamics Simulations with a Reactive Force Field. International Journal of Modelling, Identification and Control. 18, 211-217.

Bouvard, J.-L., Francis, D.K., Tschopp, M. A., Marin, E., Bammann, D., & Horstemeyer, M. (2013). An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation. International Journal of Plasticity. 42, 168-193. DOI:10.1016/j.ijplas.2012.10.005. [Abstract] [Document Site]

Francis, D.K., Deang, J., Florea, R. S., Gaston, D. R., Lee, N., Nouranian, S., Permann, C., Rudd, J., Seely, D., Whittington, W. R., & Horstemeyer, M. (2012). Characterization and Failure Analysis of a Polymeric Clamp Hanger Component. Engineering Failure Analysis. 26, 230-239. DOI:10.1016/j.engfailanal.2012.07.020. [Abstract] [Document Site]

Weed, B. C., Borazjani, A., Patnaik, S.S, Prabhu, R., & Horstemeyer, M. (2012). Stress State and Strain Rate Dependence of the Human Placenta. Annals of Biomedical Engineering. 40(10), 2255-2265.

Horstemeyer, M., Deng, X., Wang, J., Solanki, K.N., & Zhang, J. (2012). Parametric Study of Meshing Characteristics with Respect to Different Meshing Rollers of the Antibacklash Double-roller Enveloping Worm Gear. Journal of Mechanical Design, Transactions of the ASME. 134(8), 081004.

Ma, Q., Li, B., Oppedal, A. L., Whittington, W. R., Horstemeyer, S., Marin, E., Wang, P., & Horstemeyer, M. (2012). Strain Rate Dependence of Twinning at 450°C and Its Effect on Microstructure of an Extruded Magnesium Alloy. Materials Science and Engineering A. Elsevier. 559, 314-318.

Zhang, X. Y., Li, B., Wu, X. L., Zhu, Y. T., Ma, Q., Liu, Q., Wang, P., & Horstemeyer, M. (2012). Twin Boundaries Showing Very Large Deviations from the Twinning Plane. Scripta Materialia. Elsevier. 67, 862-865.

Stone, T.W., & Horstemeyer, M. (2012). Length Scale Effects of Friction in Particle Compaction Using Atomistic Simulations and a Friction Scaling Model. Journal of Nanoparticle Research. Springer. 14, 1121. [Abstract]

Arockiasamy, A., Toghiani, H., Oglesby, D., Horstemeyer, M., Bouvard, J.-L., & King, R. (2012). TG-DSC-FTIR-MS Study of Gaseous Compounds Evolved during Thermal Decomposition of Styrene-butadiene Rubber. Journal Thermal Analysis and Calorimetry. Springer. 111, 535-539.

Haupt, T., Sukhija, N., & Horstemeyer, M. (2012). Cyberinfrastructure Support for Engineering Virtual Organization for CyberDesign. In Roman Wyrzykowski, Jack Dongarra, Konrad Karczewski, Jerzy Wasniewski (Eds.), Lecture Notes in Computer Science. SpringerLink. 7204, 161-170. DOI:10.1007/978-3-642-31500-8_17. [Abstract] [Document Site]

Antonyraj, A., Toghiani, H., Oglesby, D., Horstemeyer, M., Bouvard, J.-L., & King, R. (2012). TGA-DTA-FTIR-MS Study of Gaseous Compounds Evolved During Thermal Decomposition of Rubber. Journal of Thermal Analysis and Calorimetry. 109(1), 8. DOI:10.1007/s10973-012-2559-0.

Martin, H. J., Horstemeyer, M., Wang, P., Danzy, J., & Alvarez, R. (2012). Quantification of Corrosion Pitting Under Immersion and Salt Spray Environments on an As-Cast AM60 Magnesium Alloy. Corrosion. 68(6), 571-585.

Martin, H. J., Alvarez, R., Horstemeyer, M., Qiang-Chandler, M., Williams, T. N., & Wang, P. (2012). Quantification of Corrosion Pitting Under Immersion and Salt Spray Environments on an As-Cast AM60 Magnesium Alloy. In David E. Laughlin (Ed.), Corrosion. NACE. 68, 571-585. [Abstract]

Baird, J., Li, B., Parast, S., Horstemeyer, S., Hector, L., Jr., Wang, P., & Horstemeyer, M. (2012). Localized Twin Bands in Sheet Bending of a Magnesium Alloy. Scripta Materialia. Elsevier. 67, 471-474.

Jelinek, B., Groh, S., Moitra, A., Horstemeyer, M., Houze, J., Kim, S., Wagner, G. J., & Baskes, M. I. (2012). Modified Embedded Atom Method Potential for Al, Si, Mg, Cu, and Fe Alloys. Physical Review B. American Physical Society. 85(24), 245102. DOI:10.1103/PhysRevB.85.245102. [Abstract] [Document Site]

Tschopp, M. A., Solanki, K.N., Baskes, M. I., Gao, F., Sun, X., & Horstemeyer, M. (2012). Generalized Framework for Interatomic Potential Design: Application to Fe-He System. Journal of Nuclear Materials. Elsevier. 425(1-3), 22-32.

Horstemeyer, M., Jordon, J. B., Jones, J. W., & Rettberg, L. H. (2012). Low-cycle Fatigue Behavior of Die-cast Mg Alloys AZ91 and AM60. Metal and Materials Transactions A. 43(7), 2260-2274. DOI:10.1007/s11661-012-114-8.

Tang, T., Hammi, Y., Horstemeyer, M., & Wang, P. (2012). Finite Element Micromechanical Analysis of the Deformation and Stress State Dependent Damage Evolution in Fiber Reinforced Metal Matrix Composites. Computational Materials Science. 59, 165-173.

Weed, B., Borazjani, A., Patnaik, S. S., Prabhu, R., Horstemeyer, M., Franz, T., Williams, L. N., & Liao, J. (2012). Stress State Dependence of Human Placenta. Annals of Biomedical Engineering. Springer. 40(10), 2255-65. [Abstract]

Walton, C. A., Martin, H. J., Horstemeyer, M., & Wang, P. (2012). Quantification of Corrosion Mechanisms Under Immersion and Salt-spray Environments on an Extruded AZ31 Magnesium Alloy. Corrosion Science. 56, 194-208.

Liao, J., Joyce, E. M., Merryman, D. W., Jones, H. L., Tahai, M., Horstemeyer, M., Williams, L. N., Hopkins, R. A., & Sacks, M. S. (2012). The Intrinsic Fatigue Mechanism of the Porcine Aortic Valve Extracellular Matrix. Cardiovascular Engineering and Technology. 3(1), 62-72. DOI:10.1007/s13239-011-0080-4. [Abstract] [Document] [Document Site]

Li, B., El Kadiri, H., & Horstemeyer, M. (2012). Extended Zonal Dislocations Mediating {11-22} Twinning in Titanium. Philosophical Magazine. 92(8), 1006-1022.

Tschopp, M. A., Solanki, K.N., Baskes, M. I., Gao, F., Sun, X., Khaleel, M., & Horstemeyer, M. (2012). Probing Grain Boundary Sink Strength at the Nanoscale: Energetics and Length Scales of Vacancy and Interstitial Absorption by Grain Boundaries in Alpha-Fe. Physical Review B. 85, 064108. DOI:10.1103/PhysRevB.85.064108. [Document Site]

Tang, T., Horstemeyer, M., & Wang, P. (2012). Micromechanical Analysis of Thermoelastoplastic Behavior of Metal Matrix Composites. International Journal of Engineering Science. 51, 161-167.

Damiens, N. R., Rhee, H., Hwang, Y., Park, S. J., Hammi, Y., Lim, H., & Horstemeyer, M. (2012). Compressive Behavior of a Turtle's Shell: Experiment, Modeling, and Simulation. Journal of the Mechanical Behavior of Biomedical Materials. 6, 106-112.

Tschopp, M. A., Solanki, K.N., Baskes, M. I., Gao, F., Sun, X., Khaleel, M., & Horstemeyer, M. (2012). Generalized Framework for Interatomic Potential Design: Application to the Fe-He System. Journal of Nuclear Materials. 425(1-3), 22-32. DOI:10.1016/j.jnucmat.2011.08.003. [Document Site]

Asle Zaeem, M., El Kadiri, H., Horstemeyer, M., Khafizov, M., & Utegulov, Z. (2012). Effects of Internal Stresses and Intermediate Phases on the Coarsening of Coherent Precipitates: A Phase-field Study. Current Applied Physics. Elsevier. 12, 570-580. [Abstract] [Document Site]

Li, B., El Kadiri, H., & Horstemeyer, M. (2011). Extended Zonal Dislocations Mediating {1122} Twinning in Titanium. Philosophical Magazine. 92(8), 1006-1022.

Wang, C., Y., D., Zhang, J., Lacy, T. E., Xue, Y., Toghiani, H., Horstemeyer, M., & Pittman, C. (2011). Kenaf Bast Fiber Bundle-reinforced Unsaturated Polyester Composites IV: Water Resistance and Composite Mechanical Properties Improvement. Forest Products Journal. 60(4), 366-372.

Horstemeyer, M., Hammi, Y., Allison, P. G., Brown, H. R., Tucker, M.T., & Hwang, Y. (2011). Microstructure-Property Relations of a Steel Powder Metal under Varying Temperatures, Strain Rates, and Stress States. Matls. Science Eng. A. 529(1), 335-344.

Oppedal, A. L., El Kadiri, H., Tomé, C. N., Kaschner, G. C., Vogel, S. C., Baird, J., & Horstemeyer, M. (2011). Effect of Dislocation Transmutation on Modeling Hardening Mechanisms by Twinning in Magnesium. International Journal of Plasticity. Elsevier. 30-31, 41-61. DOI:10.1016/j.ijplas.2011.09.002. [Document Site]

Allison, P. G., Horstemeyer, M., & Brown, H. (2011). Modulus Dependence on Large Scale Porosity of Powder Metallurgy Steel. Journal of Materials Engineering and Performance. 1-4.

Ma, Q., El Kadiri, H., Oppedal, A. L., Baird, J., Li, B., Horstemeyer, M., & Vogel, S. C. (2011). Twinning Effects in a Rod-Textured AM30 Magnesium Alloy. International Journal of Plasticity. 29(2012), 60-76.

Mohsen, A. Z., El Kadiri, H., Horstemeyer, M., Wang, P., & Mesarovic, S. (2011). Effect of the Compositional Strain on the Diffusive Interface Thickness and on the Phase Transformation in a Phase-Field Model for Binary Alloys. Journal of Phase Equilibria and Diffusion 2011. 1-7.

Sherburn, J. A., Horstemeyer, M., Bammann, D., & Baumgardner, J. R. (2011). Two Dimensional Mantle Convection Simulations Using an Internal State Variable Model: The Role of a History Dependent Rheology on Mantle Convection. Geophysical Journal International. 186(3), 945-962.

Potirniche, G., Pascu, A., Shoemaker, N., Wang, P., & Horstemeyer, M. (2011). A Visco-Hyperelastic Model for the Thermomechanical Behavior of Polymer Fibers. International Journal Damage Mech. 20(7), 1002-1020.

Jordon, J. B., Gibson, J. B., Horstemeyer, M., El Kadiri, H., Baird, J., & Lou, A. A. (2011). Effect of Twinning, Slip, and Inclusions on the Fatigue Anisotropy of Extrusion-textured AZ61 Magnesium Alloy. Materials Science and Engineering A. Elsevier. 528, 6860-6871. [Abstract]

Lugo, M., Jordon, J. B., Tschopp, M. A., Horstemeyer, M., & Gokhale, A. (2011). Quantification of Damage Evolution in a 7075 Aluminum Alloy Using an Acoustic Emission Technique. Materials Science and Engineering A. 528, 6708-6714. [Abstract]

Asle Zaeem, M., El Kadiri, H., Mesarovic, S. D., Horstemeyer, M., & Wang, P. (2011). Effect of the Compositional Strain on the Diffusive Interface Thickness and on the Phase Transformation in a Phase-field Model for Binary Alloys. Journal of Phase Equilibria and Diffusion. 32, 302-308. [Abstract] [Document Site]

Asle Zaeem, M., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). Investigating the Effects of Grain Boundary Energy Anisotropy and Second-Phase Particles on Grain Growth Using a Phase-Field Model. Computational Materials Science, Volume. 50(8), 2488-2492. [Abstract] [Document] [Document Site]

Tang, T., Kim, S., Jordon, J. B., Horstemeyer, M., & Wang, P. (2011). Atomistic Simulations of Fatigue Crack Growth and the Associated Fatigue Crack Tip Stress Evolution in Magnesium Single Crystals. Computational Materials Science. 50, 2977-2986.

Asle Zaeem, M., El Kadiri, H., Horstemeyer, M., Wang, P., & Cherkaoui, M. (2011). The Role of Compositional Strain in the Instability of Solid-liquid Thin Film Interfaces. Modern Physics Letters B (MPLB). 25(19), 1-11. DOI:10.1142/S0217984911026450. [Abstract] [Document Site]

Prabhu, R., Horstemeyer, M., Bouvard, J.-L., Sherburn, J. A., Williams, L. N., Marin, E., & Liao, J. (2011). Coupled Experiment / Finite Element Analysis on the Mechanical Response of Porcine Brain under High Strain Rates. Journal of the Mechanical Behavior of Biomedical Materials. Elsevier. 4(7), 1067-1080. DOI:10.1016/j.jmbbm.2011.03.015. [Abstract]

Tschopp, M. A., Horstemeyer, M., Gao, F., Sun, X., & Khaleel, M. (2011). Energetic Driving Force for Preferential Binding of Self-Interstitial Atoms to Fe Grain Boundaries over Vacancies. Scripta Materialia. 64(9), 908-911. [Document Site]

Lugo, M., Tschopp, M. A., Jordon, J. B., & Horstemeyer, M. (2011). Microstructure and Damage Evolution During Tensile Loading in a Wrought Magnesium Alloy. Scripta Materialia. 64, 912-915. [Document Site]

Trim, W., Horstemeyer, M., Rhee, H., El Kadiri, H., Williams, L. N., Liao, J., McKittrick, J., Walters, K. B., & Park, S. J. (2011). The Effects of Water and Microstructure on the Mechanical Properties of Bighorn Sheep (Ovis Canadensis) Horn Keratin. Acta Biomaterialia. Elsevier . 7(3), 1228-1240. [Abstract] [Document Site]

Rhee, H., Horstemeyer, M., & Ramsay, A. (2011). A Study on the Structure and Mechanical Behavior of the Dasypus Novemcinctus Shell. Materials Science and Engineering C. 31(2), 363-369.

Du, Y., Zhang, J., Yu, J., Lacy, T., Xue, Y., Toghiani, H., Horstemeyer, M., & Pittman, C. (2011). Kenaf Bast Fiber Bundle-Reinforced Unsaturated Polyester Composites IV: Effects of Fiber Loadings and Aspect Ratios on Tensile Properties of Kenaf Bast Fiber Bundle-Reinforced Unsaturated Polyester Composites. Forest Products Journal. 60(7/8), 582-591.

Moitra, A., Kim, S., Kim, S., & Horstemeyer, M. (2011). The Effect of Vanadium-Carbon Monolayer on the Absorption of Tungsten and Carbon Atoms on Tungsten-Carbide(0001) Surface. Science of Sintering. 43, 153-159.

Moitra, A., Solanki, K.N., & Horstemeyer, M. (2011). The Location of Atomic Hydrogen in NiTi Alloy: A First Principles Study. Computational Materials Science. 50(3), 820-823. [Abstract] [Document Site]

Sherburn, J. A., Horstemeyer, M., Bammann, D., & Baumgardner, J. (2011). Two Dimensional Mantel Convection Simulations Using an Internal State Variable Model: The Role of a History Dependent Rheology on Mantle Convection. Geophysical Journal Int. 186(3), 945-962.

Ma, Q., El Kadiri, H., Oppedal, A. L., Baird, J., Horstemeyer, M., & Cherkaoui, M. (2011). Twinning and Double Twinning Upon Compression of Prismatic Textures in an AM30 Magnesium Alloy. Scripta Materialia. 64(9), 813-816.

Du, Y., Zhang, J., Xue, Y., Lacy, T., Toghiani, H., Horstemeyer, M., & Pittman, C. (2011). Kenaf Bast Fiber Bundle-Reinforced Unsaturated Polyester Composites III: Statistical Strength Characteristics and Cost-Performance Analyses. Forest Products Journal. 60(6), 514-521.

Tang, T., Kim, S., Horstemeyer, M., & Wang, P. (2011). Atomistic Modeling of Crack Growth in Magnesium Single Crystal. Engineering Fracture Mechanics. 78, 191-201.

Moitra, A., Kim, S., & Horstemeyer, M. (2011). Structural and Thermal Properties of Calcium Using a MEAM Potential. CALPHAD. 35, 262-268.

Jordon, J. B., Horstemeyer, M., Daniewicz, S., Badarinarayan, H., & Grantham, J. (2010). Fatigue Characterization and Modeling of Friction Stir Spot Welds in Magnesium AZ31 Alloy. Journal of Engineering Materials and Technology. 132.

Martin, H. J., Horstemeyer, M., & Wang, P. (2010). Structure-Property Quantification of Corrosion Pitting Under Immersion and Salt-Spray Environments on an Extruded AZ61 Magnesium Alloy. Corrosion Science. 53(4), 1348-1361. [Abstract]

Du, Y., Zhang, J., Toghiani, H., Lacy, T., Xue, Y., Horstemeyer, M., & Pittman, C. (2010). Kenaff Bast Fiber Bundle-Reinforced Unsaturated Polyester Composites: I. Processing Technique for High Fiber Loading. Forest Products Journal. 60(3), 289-295.

Hossain, D., Tschopp, M. A., Ward, D. K., Bouvard, J.-L., Horstemeyer, M., & Wang, P. (2010). Molecular Dynamics Simulations of Deformation Mechanisms of Amorphous Glassy Polymers. Polymer. 51, 6071-6083. [Document Site]

Du, Y., Zhang, J., Toghiani, H., Lacy, T., Xue, Y., Horstemeyer, M., & Pittman, C. (2010). Kenaf Bast Fiber Bundle-Reinforced Unsaturated Polyester Composites II: Water Resistance and Composite Mechanical Properties Improvement. Forest Products Journal. 60(4), 366-372.

Du, Y., Zhang, J., Toghiani, H., Lacy, T., Xue, Y., Horstemeyer, M., & Pittman, C. (2010). Kenaf Base Fiber Bundle - Reinforced Unsaturated Polyester Composites. I: Processing Techniques for High Kenaf Fiber Loading. Forest Products Journal. Forest Products Society. 60(3), 289-295.

Antonyraj, A., Eliezer, D., Wang, P., Horstemeyer, M., & King, R. (2010). Effect of Cathodic Charging on Al-32Si-2Cu Alloy in Acidic Solution. Materials Research. 13(3), 361-367. [Document]

Clemmer, J., Liao, J., Davis, D., Horstemeyer, M., & Williams, L. N. (2010). A Mechanistic Study for Strain Rate Sensitivity of Rabbit Patellar Tendon. Journal of Biomechanics. 43(14), 2785-2791. [Abstract] [Document Site]

Begonia, M., Prabhu, R., Liao, J., Horstemeyer, M., & Williams, L. N. (2010). The Influence of Strain Rate Dependency on the Structure-property Relations of Porcine Brain. ANNALS OF BIOMEDICAL ENGINEERING. 38(10), 3043-3057. [Abstract] [Document Site]

Yassar, R. S., AbuOmar, O., Hansen, E., & Horstemeyer, M. (2010). On Dislocation-based Artificial Neural Network Modeling of Flow Stress. Journal of Materials and Design. 31(8), 3683-3689.

Tucker, M.T., Horstemeyer, M., Whittington, W. R., Solanki, K.N., & Gullett, P. (2010). The Effect of Varying Strain Rates and Stress States on the Plasticity, Damage, and Fracture of Aluminum Alloys. In Elsevier (Ed.), Mechanics of Materials. 42(10), 895-907. [Abstract] [Document Site]

Antonyraj, A., Eliezer, D., Wang, P., Horstemeyer, M., & King, R. (2010). Electrochemical Hydrogenation and Corrosion Studies of Ti-48Al-2Cr-2Nb Alloy in Acidic Solution. Anti Corrosion Methods and Materials;. 57(6), 280-89. [Document Site]

Bouvard, J.-L., Ward, D. K., Hossain, D., Marin, E., Bammann, D., & Horstemeyer, M. (2010). A General Inelastic Internal State Variable Model for Amorphous Glassy Polymers. Acta Mechanica. 213(1), 71-96.

Tang, T., Kim, S., & Horstemeyer, M. (2010). Molecular Dynamics Simulations of Void Growth and Coalescence in Single Crystal Magnesium. Acta Materialia. 58(14), 4742-4759.

Acar, E., Hammi, Y., Allison, P., Stone, T.W., & Horstemeyer, M. (2010). Sensitivity and Uncertainty Analysis of Microstructure-Property Relations for Compacted Powder Metals. Powder Metallurgy. 53(2), 141-145. [Abstract]

Martin, H. J., Horstemeyer, M., Williams, T. N., Wang, P., Chandler, M., & Ruiz, A. (2010). Corrosion Relationships as a Function of Time and Surface Roughness on a Structrural AE44 Magnesium Alloy. Corrosion Science. 52, 1635-1648.

Yassar, R. S., AbuOmar, O., Hansen, E., & Horstemeyer, M. (2010). On Dislocation-Based Artificial Neural Network Modeling of Flow Stress. J Major Design. 10, 1016.

Arockiasamy, A., German, R., Wang, P., Horstemeyer, M., Suri, P., & Park, S. J. (2010). DSC Analysis of Al6061 Alumnium Alloy Powder by Rapid Solidification: Effect of Additives. Journal of Thermal Analysis and Calorimetry. 100, 361-366.

Antonyraj, A., German, R. M., Heaney, D. F., Wang, P., Horstemeyer, M., King, R., & Adcock, B. (2010). Effect of Additives on Sintering Response of Titanium by Powder Injection Molding. Powder Metallurgy. In press (May 2010). [Document]

Xue, Y., Pascu, A., Horstemeyer, M., Wang, L., & Wang, P. (2010). Microporosity Effects on Cyclic Plasticity and Fatigue of LENS-Processed Steel. Acta Materialia. 58, 4029-4038. [Abstract]

Martin, H. J., Horstemeyer, M., & Wang, P. (2010). Effects of Variations in Salt-Spray Conditions on the Corrosion Mechanisms of an AE44 Magnesium Alloy. International Journal of Corrosion. Hindawi Publishing Corporation. 2010(602342), 10. [Abstract] [Document Site]

Acar, E., Solanki, K.N., Rais-Rohani, M., & Horstemeyer, M. (2010). Stochastic Uncertainty Analysis of Damage Evolution Computed through Microstructure-Property Relations. Probabilistic Engineering Mechanics. Elsevier. 25(2), 198-205. [Abstract] [Document Site]

Moitra, A., Kim, S., Kim, S., Park, S. J., German, R., & Horstemeyer, M. (2010). Investigation on Sintering Mechanism of Nanoscale Tungsten Powder Based on Atomistic Simulation. Acta Materialia. 58(11), 3939-3951.

Xue, Y., Wright, A., McDowell, D. L., Horstemeyer, M., Solanki, K.N., & Hammi, Y. (2010). Micromechanics Study of Fatigue Damage Incubation Following an Initial Overstrain. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. 132(1), 021010-17. [Abstract] [Document Site]

Groh, S., Marin, E., & Horstemeyer, M. (2010). Nanoscale Void Growth in Magnesium: A Molecular Dynamics Study. International Journal of Applied Mechanics. 2(1), 191-205.

Tang, T., Kim, S., & Horstemeyer, M. (2010). Fatigue Crack Growth in Magnesium Single Crystals under Cyclic Loading: Molecular Dynamics Simulation. Computational Materials Science. 48(n22), 426-439. [Document]

Martin, H. J., Horstemeyer, M., & Wang, P. (2010). Comparison of Corrosion Pitting Under Immersion and Salt-Spray Environments on an As-Cast AE44 Magnesium Alloy. Corrosion Science. Elsevier. 52, 3624-3638. [Abstract]

Horstemeyer, M., Farkas, D., Kim, S., Tang, T., & Potirniche, G. (2010). Nanostructurally Small Cracks (NSC): A Review on Atomistic Modeling of Fatigue. International Journal of Fatigue. 32(9), 1473-1502. [Document]

Solanki, K.N., Horstemeyer, M., Steele, G., Hammi, Y., & Jordon, J. B. (2010). Calibration, Validation, and Verification Including Uncertainty of a Physically Motivated Internal State Variable Plasticity and Damage Model. International Journal of Solids and Structures. 47(2), 186-203. [Abstract] [Document Site]

McKittrick, J., Chen, P. Y., Tombolato, L., Novitskaya, E. E., Trim, W., Hirata, G. A., Olevsky, E. A., Horstemeyer, M., & Meyers, M. A. (2010). Energy Absorbent Natural Materials and Bioinspired Design Strategies: A Review. Materials Science and Engineering C. 30(3), 331-342. [Document]

Antonyraj, A., German, R. M., Wang, P., Horstemeyer, M., Suri, P., & Park, S. J. (2010). DSC Analysis 6061 Aluminum Alloy Powder by Rapid Solidification: Effect of Additives. Journal of Themal Anlaysis and Calorimetry. UK: Springer. 100(1), 361-366. [Document]

Antonyraj, A., German, R. M., Wang, P., Horstemeyer, M., Morgan, W., & Park, S. J. (2009). Sintering Behavior of Al6061 Powder Produced by Rapid Solidification. Powder Metallurgy. (2009): U.K.- In Press. [Document]

Jordon, J. B., Horstemeyer, M., Yang, N., Major, F., Gall, K., Fan, J., & McDowell, D. (2009). Microstructural Inclusion Influence on Fatigue of a Cast A356 Aluminum Alloy. Metallurgical and Materials Transactions A. [Abstract]

Sherburn, J. A., & Horstemeyer, M. (2009). Hydrodynamic Modeling of Impact Craters in Ice. International Journal of Impact Engineering. 37(1), 27-36. [Abstract]

Kim, S., Horstemeyer, M., Baskes, M., Rais-Rohani, M., Kim, S., Jelinek, B., Houze, J., Moitra, A., & Liyanage, Laalitha S. I. (2009). Semi-Empirical Potential Methods for Atomistic Simulations of Metals and Their Construction Procedure. Journal of Materials Engineering and Technology. 131(4), 30-39.

Rhee, H., Horstemeyer, M., Youngkeun, H., Lim, H., El Kadiri, H., & Trim, W. (2009). A Study on the Structure and Mechanical Behavior of the Terrapene Carolina Carapace: A Pathway to Design Bio-Inspired Synthetic Composites. Materials Science and Engineering C. 29(8), 2333-2339.

Solanki, K.N., Acar, E., Rais-Rohani, M., Horstemeyer, M., & Steele, G. (2009). Product Design Optimization with Microstructure-Property Modeling and Associated Uncertainties. International Journal of Design Engineering. Inderscience Publishers. 2(1), 47-79. [Abstract] [Document Site]

Bouvard, J.-L., Ward, D. K., Hossain, D., Nouranian, S., Marin, E., & Horstemeyer, M. (2009). Review of Hierarchical Multiscale Modeling to Describe the Mechanical Behavior of Amorphous Polymers. Journal of Engineering Materials and Technology - Transactions of the ASME. 131(4), 041206-1. DOI:10.1115/1.3183779. [Abstract] [Document] [Document Site]

Jordon, J. B., Horstemeyer, M., Solanki, K.N., Bernard, J.D., Berry, J., & Williams, T. N. (2009). Damage Characterization and Modeling of a 7075-T651 Aluminum Plate. Materials Science & Engineering A. Elsevier Ltd. 527(1-2), 169-178. [Abstract] [Document Site]

Wang, L., Pratt, P., Felicelli, S. D., El Kadiri, H., Berry, J., Wang, P., & Horstemeyer, M. (2009). Pore Formation in Laser-Assisted Powder Deposition Process. Journal of Manufacturing Science and Engineering. 131, 051008-1-9. [Document Site]

Lee, S. G., Mao, Y., Gokhale, A. M., Harris, J., & Horstemeyer, M. (2009). Application of Digital Image Processing for Automatic Detection and Characterization of Cracked Constituent Particles/Inclusions in Wrought Aluminum Alloys. Materials Characterization. 60(9), 964-970.

Kim, S., Horstemeyer, M., Baskes, M. I., Kim, S., Houze, J., Jelinek, B., Moitra, A., & Liyanage, Laalitha S. I. (2009). Semi-empirical Potential Methods for Atomistic Simulations of Metals and Their Construction Procedures. Journal of Engineering Materials and Technology. 131(4), 041210. [Abstract] [Document] [Document Site]

Horstemeyer, M., Yassar, R. S., & Baird, J. (2009). Evolution of In-Grain Orientation Gradient in Plastically Strained Particulate Materials. Materials Science and Engineering A. 517(1-2), 286-292.

Groh, S., Marin, E., Horstemeyer, M., & Bammann, D. (2009). Dislocation Mobility in Magnesium: A Molecular Dynamics/statics Study. Modelling Simulation Material Science and Engineering. 17, 075009. [Document Site]

Groh, S., Marin, E., Horstemeyer, M., & Zbib, H. M. (2009). Multiscale Modeling of the Plasticity in an Aluminum Single Crystal. International Journal of Plasticity . 25(8), 1456-1473.

Wang, L., Daniewicz, S., Horstemeyer, M., & Sintay, S. (2009). Three Dimensional Finite Element Analysis Using Crystal Plasticity for a Parameter Study of Fatigue Crack Incubation in a 7075 Aluminum Alloy. International Journal of Fatigue and Fracture. 31, 659-667.

Chandler, M. Q., Bammann, D., & Horstemeyer, M. (2009). A Continuum Hydrogen-Assisted Void Nucleation Model for Ductile. Mechanics and Physics of Solids.

Horstemeyer, M., & El Kadiri, H. (2009). Jurassic Radiolarite Pulses, from the Dorsale Calcaire (Internal Rif, Morrocco): A Clue for Correlating and Interpreting the Tethyan Radiolarites. Stratigraphy. Micropaleontology Press. 6(4), 137-156. [Abstract]

Horstemeyer, M., Ren, X. C., Fang, H., Acar, E., & Wang, P. (2009). A Comparative Study of Design Optimisation Methodologies for Side-Impact Crashworthiness, Using Injury-based versus Energy-based Criterion. International Journal of Crashworthiness. 14(2), 125-138.

Wang, L., Daniewicz, S., Horstemeyer, M., Sintay, S., & Rollett, A. D. (2009). Three-Dimensional Finite Element Analysis Using Crystal Plasticity for a Parameter Study of Fatigue Crack Incubation in a 7075 Aluminum Alloy. International Journal of Fatigue. 31, 659-667.

Tucker, M.T., Horstemeyer, M., Gullett, P., El Kadiri, H., & Whittington, W. R. (2009). Anisotropic Effects on the Strain Rate Dependence of a Wrought Magnesium Alloy. Scripta Materialia. Amsterdam: Elsevier, Ltd.. 60(3), 182-185. [Abstract]

El Kadiri, H., Horstemeyer, M., & Bammann, D. (2008). A Theory of Stress-Driven Interfacial Damage upon Cationic Selective Oxidation of Alloys. In K. Bhattacharya and H. Gao (Eds.), Journal of Mechanics and Physics of Solids. Elsevier Ltd, Oxford, OX5 1GB, United Kingdom. 56(12), 3392-3415. [Abstract]

El Kadiri, H., Wang, L., Horstemeyer, M., Shahbazian-Yassar, R., Berry, J., Felicelli, S. D., & Wang, P. (2008). Phase Transformations in Low-alloy Steel Laser Deposits. Materials Science and Engineering A. 494(1-2), 10-20. [Document]

Fuller, R. W., Ehrgott, J. Q., Heard, W. F., Robert, S. D., Stinson, R. D., Solanki, K.N., & Horstemeyer, M. (2008). Failure Analysis of AISI 304 Stainless Steel Shaft. Engineering Failure Analysis. 15, 835–846. [Abstract]

Williams, L. N., Horstemeyer, M., Elder, S., & Bouvard, J.-L. (2008). The Anisotropic Compressive Mechanical Properties of the Rabbit Patellar Tendon. Biorheology. 45(2008), 577-586.

Williams, L. N., Elder, S., & Horstemeyer, M. (2008). Experimental Investigations of Anisotropic Shear Properties of Rabbit Petallar Tendons. In BE Journal Ed. Board (Eds.), Biological Engineering Journal. ASABE Publications. 1, 255-64. [Abstract]

Williams, L. N., Elder, S., & Horstemeyer, M. (2008). Variation of Diameter Distribution, Number Density, and Area Fraction of Fibrils within Five Areas of the Rabbit Patellar Tendon. In BE Journal Ed. Board (Eds.), Annals of Anatomy. Annals of Anatomy. 190, 442-451. [Abstract]

Moitra, A., Kim, S., Houze, J., Jelinek, B., Park, S. J., German, R., Horstemeyer, M., & Kim, S. (2008). Melting Tungsten Nanoparticles: a Molecular Dynamics Study. Journal of Physics D: Applied Physics. IOP publishing. 41, 185406. [Abstract] [Document Site]

Stone, T.W., Horstemeyer, M., Hammi, Y., & Gullett, P. (2008). Contact and Friction of Single Crystal Nickel Nanoparticles Using Molecular Dynamics. Acta Materialia. 56, 3577-3584. [Abstract] [Document Site]

Potirniche, G., Hearndon, J., Daniewicz, S., Parker, D., Cuevas, P., Wang, P., & Horstemeyer, M. (2008). A Two-dimensional Damaged Finite Element for Fracture Applications. Engineering Fracture Mechanics. 75(2008), 3895-3908.

Houze, J., Kim, S., Kim, S., Park, S. J., German, R., & Horstemeyer, M. (2008). The Effect of Fe Atoms on the Adsorption of a W Atom on W(100) Surface. Journal of Applied Physics. 103(10), 106103. [Abstract]

Gullett, P., Horstemeyer, M., Baskes, M. I., & Fang, H. (2008). Deformation Gradient Tensor and Strain Tensors for Atomistic Simulations. MSMSE. 16, 1-17.

Yassar, R. S., Murphy, J., Burton, C., Horstemeyer, M., El Kadiri, H., & Shokuhfar, T. (2008). Microstructure History Effect During Sequential Thermomechanical Processing. Matls. Sci. Eng. A.. 10, 1016.

Shahbazian-Yassar, R., Murphy, J., Burton, C., Horstemeyer, M., & Shokuhfar, T. (2008). Microstructure History Effect During Sequential Thermomechanical Processing. Matls. Sci., Eng. A.. 1016.

Chandler, M., Horstemeyer, M., Baskes, M. I., Wagner, G., Gullett, P., & Jelinek, B. (2008). Hydrogen Effects on Nanovoid Nucleation at Nickel Grain Boundaries. Acta Materialia. Elsevier Ltd.. 56(3), 619-631. [Abstract] [Document Site]

Wang, L., Felicelli, S. D., Gooroochurn, Y., Wang, P., & Horstemeyer, M. (2008). Optimization of the LENSTM Process for Steady Molten Pool Size. Materials Science and Engineering A. 474, 148-156. [Document]

Ingram, J., Zhiou, Y., Jeelani, S., Lacy, T., & Horstemeyer, M. (2008). Effect of Strain Rate on Tensile Behavior of Polypropylene and Carbon Nanofiber Filled Polypropylene. Materials Science & Engineering A. 489(1), 99-106.

Chandler, M., Horstemeyer, M., Wagner, G. J., Baskes, M. I., Gullett, P., & Jelinek, B. (2008). Hydrogen Effects on Nanovoid Nucleation in Face-centered Cubic Single-crystals. Acta Materialia . Elsevier. 56(1), 95-104. [Abstract] [Document Site]

El Kadiri, H., Horstemeyer, M., Jordon, J. B., & Xue, Y. (2008). Fatigue Crack Growth Mechanisms in High Pressure Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A. Springer Boston. 39(1), 190-205. [Abstract]

Querin, J., Schneider, J.A., & Horstemeyer, M. (2007). Analysis of Micro Void Formation at Grain Boundary Triple Points in Monotonically Strained AA6022-T43 Sheet Metal. Nat'l Science and Engineering. 463(1), 101-106.

Horstemeyer, M., Siervogel, J., Kwasniewski, L., Wekezer, J., Christian, B., & Roufa, G. (2007). Material and Structural Crashworthiness Characterization of Paratransit Buses. International Journal of Crashworthiness. 12(5), 509-520.

Potirniche, G., Horstemeyer, M., & Ling, X. W. (2007). An Internal State Variable Damage Model in Crystal Plasticity. Mechanics of Materials. 39(10), 941-952.

Jordon, J. B., Horstemeyer, M., Solanki, K.N., & Xue, Y. (2007). Damage and Stress State Influence on the Bauschinger Effect in Aluminum Alloys. Mechanics of Materials. 39, 920-931.

Xue, Y., Burton, C., Horstemeyer, M., McDowell, D. L., & Berry, J. (2007). Multistage Fatigue Modeling of Cast A356-T6 and A380-F Aluminum Alloys. METALLURGICAL AND MATERIALS TRANSACTIONS B. 38, 601-606.

Xue, Y., McDowell, D. L., Horstemeyer, M., Dale, M., & Jordon, J. B. (2007). Microstructure-based Multistage Fatigue Modeling of Aluminum Alloy 7075-T651. Engineering Fracture Mechanics. 74, 2810-2823. [Abstract]

Xue, Y., Horstemeyer, M., McDowell, D. L., El Kadiri, H., & Fan, J. (2007). Microstructure-based Multistage Fatigue Modeling of a Cast AE44 Magnesium Alloy. International Journal of Fatigue. Elsevier Ltd, Oxford, OX5 1GB, United Kingdom. 29(4), 666-676. [Abstract]

Xue, Y., El Kadiri, H., Horstemeyer, M., Jordon, J. B., & Weiland, H. (2007). Micromechanisms of Multistage Fatigue Crack Growth in a High-strength Aluminum Alloy. Acta Materialia. 55(6), 1975-1984. [Abstract]

Hammi, Y., & Horstemeyer, M. (2007). A Physically Motivated Anisotropic Tensorial Representation of Damage with Separate Functions for Void Nucleation, Growth, and Coalescence. Int. J. Plast.. 23(10), 1641-1678. [Abstract]

Xue, Y., Veazie, D. R., & Horstemeyer, M. (2007). Environmental Effects on the Mechanical and Thermomechanical Properties of Aspen Fiber-polypropylene Composites. Composites Part B: Engineering. 38(2), 152-158.

Jelinek, B., Houze, J., Kim, S., Horstemeyer, M., Baskes, M. I., & Kim, S. (2007). Modified Embedded-atom Method Interatomic Potentials for the Mg-Al Alloy System. In APS (Ed.), Physical Review B. APS. 75(5), 054106. [Abstract] [Document Site]

Shahbazian-Yassar, R., Horstemeyer, M., Wang, P., Murphy, J. C., Murphy, J., & Stolting, K. (2006). Evolution of In-grain Orientation Gradient in Plastically Strained Precipitation Hardened Polycrystals. Met. Mater. Trans. A.

Potirniche, G., Horstemeyer, M., Gullett, P., & Jelinek, B. (2006). Atomistic Modelling of Fatigue Crack Growth and Dislocation Structuring in FCC Crystals. Proceedings of the Royal Society A. The Royal Society. 462(2076), 3707-3731. [Abstract] [Document Site]

El Kadiri, H., Xue, Y., Horstemeyer, M., Jordon, J. B., & Wang, P. (2006). Identification and Modeling of Fatigue Crack Growth Mechanisms in a Die-cast AM50 Magnesium Alloy. In Elsevier (Ed.), Acta Materialia. Elsevier Ltd, Oxford, OX5 1GB, United Kingdom. 54(19), 5061-5076. [Abstract]

Potirniche, G., Horstemeyer, M., Wagner, G. J., & Gullett, P. (2006). A Molecular Study of Void Growth and Coalescene in Single Crystal Nickel. International Journal of Plasticity.

Jones, M. K., Horstemeyer, M., & Belvin, A. D. (2006). A Multiscale Analysis of Void Coalescence in Nickel. Journal of Engineering Materials and Technology. 129, 94-104.

El Kadiri, H., Bienvenu, Y., Solanki, K.N., Horstemeyer, M., & Wang, P. (2006). Creep and Tensile Behaviors of Fe-Cr-Al Foils and Laser MicroWelds at High Temperature. Materials Science and Engineering A, A421. 168-181. [Abstract] [Document]

Potirniche, G., Horstemeyer, M., Jelinek, B., & Wagner, G. J. (2005). Fatigue Damage in Nickel and Copper Single Crystals at Nanoscale. International Journal of Fatigue. Elsevier Ltd.. 27(10), 1179-1185. [Document]

El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2005). Abnormal High Growth Rates of Metastable Aluminas on FeCrAl Alloys. Oxidation of Metals. Springer Science and Business Media. 64(1), 63-97. [Abstract]

Fang, H., Solanki, K.N., & Horstemeyer, M. (2005). Numerical Simulations of Multiple Vehicle Crashes and Multidisciplinary Crashworthiness Optimization. International Journal of Crashworthiness. 10(2), 161-172.

Solanki, K.N., Horstemeyer, M., Baskes, M. I., & Fang, H. (2005). Multiscale Study of Dynamic Void Collapse in Single Crystals. Mechanics of Materials. Elsevier Ltd.. 37, 317-330. [Document Site]

Fang, H., Rais-Rohani, M., Liu, Z., & Horstemeyer, M. (2005). A Comparative Study of Metamodeling Methods for Multiobjective Crashworthiness Optimization. Computers and Structures. Elsevier. 83, 2121-2136. [Abstract] [Document]

El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2005). Phase Transformation and Growth of Alumina on a Thin FeCrAl-RE Foil at around 900°C. Materials Science Forum. Les Embiez-France: Trans Tech Publications Ltd, Zurich-Ueticon, CH-8707, Switzerland. 461, 1107-1116. [Abstract]

El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2005). Influence of Laser Welding on the Alumina Growth on a Thin FeCrAl-RE Foil at High Temperature. Oxidation of Metals. Springer Science and Business Media. 64(1), 99-117. [Abstract]

Horstemeyer, M., Fang, H., & Solanki, K.N. (2004). Energy-based Crashworthiness Optimization for Multiple Vehicle Impacts. Transportation 2004: Transportation and Environment, Transportation 2004: Transportation and Environment. 11-16 .

Fang, H., Horstemeyer, M., Baskes, M. I., & Solanki, K.N. (2004). Atomistic Simulations of Bauschinger Effects of Metals with High Angle and Low Angle Grain Boundaries. Computational Methods in Applied Mechanics and Engineering. 193, 1789-1802. [Document]

El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2004). High-Temperature Oxidation Behavior of Base Material and Laser-weld Specimens of a Thin FeCrAl-RE Foil at around 900°C. Materials Science Forum. Les Embiez, France: Trans Tech Publications Ltd, Zurich-Ueticon, CH-8707, Switzerland. 461, 1157-1164. [Abstract]

Hammi, Y., Bammann, D., & Horstemeyer, M. (2004). Modeling of Anisotropic Damage for Ductile Materials in Metal Forming Processes. International Journal of Damage Mechanics. SAGE Publications Ltd. 13(2), 123-147. [Abstract]

El Kadiri, H., Dahmen, M., Bienvenu, Y., Malot, T., & Horstemeyer, M. (2004). Laser Beam Welding of Metal-Supported Automotive Catalytic Converters. Proceedings of the 23rd International Congress of Applications of Lasers and Electro-Optics. 1, 1-10.

Hammi, Y., Horstemeyer, M., & Bammann, D. (2003). An Anisotropic Damage Model for Ductile Metals. International Journal of Damage Mechanics. SAGE Publications Ltd. 12(3), 245-262. [Abstract]

Dighe, M. D., Gokhale, A. M., & Horstemeyer, M. (2002). Effect of Loading Condition and Stress State on Damage Evolution of Silicon Particles in an Al-Si-Mg Base Cast Alloy. Metallurgical and Materials Transactions-A. 33A, 555-565.

Hammi, Y., Horstemeyer, M., & Bammann, D. (2002). An Anisotropic Damage Model for Ductile Metals. Proceedings of the ASME Materials Division - 2002. New Orleans, LA, United States: American Society of Mechanical Engineers. 97, 185-192. [Abstract]

Peer-Reviewed Conference Abstracts
Forsmark, J., Li, M., Mishra, R., Plumeri, J., Michie, R., Chamanfar, A., Misiolek, W., McClelland, Z., Oppedal, A. L., Horstemeyer, M., Horstemeyer, S., Ma, X., Allison, J., Sutton, S., Luo, A., Nyberg, E., & Abdulrahman, N. (2016). An ICME Approach to the Investigation of the Relationship between Processing Parameters and Microstructure Development in an Extruded ZE20 Magnesium Alloy. 2016 TMS Annual Meeting. Nashville, TN: TMS. [Abstract]

Murphy, M. A., Horstemeyer, M., Gwaltney, S. R., Liao, J., Williams, L. N., & Prabhu, R. (2014). POPC Phospholipid Bilayer Failure Under Strip Biaxial Stretching Using Molecular Dynamics. Biomedical Engineering Society Annual Conference. San Antonio, TX.

Bertucci, R., Prabhu, R., Clark, S., Horstemeyer, M., Liao, J., & Williams, L. N. (2014). Computational Method for Analyzing Military Boot Designs at Blast Conditions. Biomedical Engineering Society Annual Conference. San Antonio, TX.

Lee, N, Horstemeyer, M., Rhee, H., Liao, J., & Williams, L. N. (2014). Multiscale Structural and Mechanics Study of the Red Billed Woodpecker Beak. TMS. San Diego, CA.

Nouranian, S., Baskes, M. I., Tschopp, M. A., Gwaltney, S. R., & Horstemeyer, M. (2014). A Parameterized Interatomic Potential for Saturated Hydrocarbons Using the Modified Embedded-Atom Method. Conference abstract, TMS 2014 Annual Meeting and Exhibition, February 16-20. San Diego, CA. [Abstract] [Document Site]

Nouranian, S., Baskes, M. I., Tschopp, M. A., Gwaltney, S. R., & Horstemeyer, M. (2013). A Reactive Interatomic Potential for the Molecular Dynamics Simulations of Saturated Hydrocarbons Using the Modified Embedded-Atom Method. Conference Abstract, The 2013 Annual Meeting of the American Institute of Chemical Engineers (AIChE), November 2-8. San Francisco, CA. [Abstract] [Document Site]

Nouranian, S., Gwaltney, S. R., Tschopp, M. A., Baskes, M. I., & Horstemeyer, M. (2013). Simulations of Bond Rupture in Normal Alkanes Under Tensile Molecular Deformation Using Reactive Potentials. Conference Abstract, The 2013 Annual Meeting of the American Institute of Chemical Engineers (AIChE), November 2-8. San Francisco, CA. [Abstract] [Document Site]

Bertucci, R., Prabhu, R., Horstemeyer, M., Sheng, J., Liao, J., & Williams, L. N. (2013). Finite Element Analysis of the Lower Extremity Due to Anti-Vehicle Blasts. BMES 2013 Annual Meeting. Seattle, WA: BMES.

Horstemeyer, M., Sukhija, N., & Haupt, T. (2013). Integrated Computational Materials Engineering (ICME)- Education and Workforce Development. 2nd World Congress on Integrated Computational Materials Engineering- ICME Challenges and Education. Salt Lake City, UT. [Abstract] [Document Site]

Patnaik, S.S, Chen, J., Prabhu, R., Horstemeyer, M., Williams, L. N., & Liao, J. (2013). Multiscale Computational Modeling of the Dynamic Compressive Behavior of Porcine Liver Tissue. BMES 2013 Annual Meeting. Seattle, WA: BMES.

Bertucci, R., Mao, Y., Gilbrech, R., Prabhu, R., Sheng, J., Horstemeyer, M., Liao, J., & Williams, L. N. (2012). Finite Element Analysis of Lower Extremity at Blast Conditions. Biomedical Engineering Society Annual Conference. Atlanta, GA: BMES.

Asle Zaeem, M., Nouranian, S., Horstemeyer, M., & Wang, P. (2012). Morphological Study of Polymer Crystallization by a Phase-field Model. Conference abstract, TMS 2012 Annual Meeting and Exhibition, March 11-15. Orlando, FL. [Abstract]

Bouvard, J.-L., Tschopp, M. A., Bammann, D., & Horstemeyer, M. (2011). Multiscale Modeling of Amorphous Polymers: from Molecular Dynamic Simulations to Continuum Models. USNCCM 2011. Minneapolis, MN.

Tang, T., Kim, S., & Horstemeyer, M. (2011). Molecular Dynamics Simulations of Fatigue Crack Growth and Fatigue Crack Tip Stress Evolution in Magnesium Single Crystals. 11th U.S. National Congress on Computational Mechanics. Minneapolis, MN..

Oppedal, A. L., El Kadiri, H., Tomé, C. N., Baird, J., Vogel, S. C., Kaschner, G. C., & Horstemeyer, M. (2011). Hardening Mechanisms upon Profuse Twinning in Pure Magnesium. TMS 2011. San Diego, CA: TMS (The Minerals, Metals & Materials Society). [Abstract]

Stone, T.W., Hardin, C., Gullett, P., & Horstemeyer, M. (2010). Atomic-Scale Friction in Metal Nanoparticles Using Molecular Dymanics Simulations. Material, Science, and Technology (MS&T). Houston, TX.

Jelinek, B., Houze, J., Groh, S., Kim, S., Horstemeyer, M., Wagner, G., & Baskes, M. (2010). MEAM Potential for Al, Si, Mg, Cu, and Fe Alloys. In APS (Ed.), Bulletin of the American Physical Society, 77th Annual Meeting of the Southeastern Section of the APS. Baton Rouge, LA: APS. 54(16), 44. [Abstract] [Document] [Document Site]

Brown, H., Bouvard, J.-L., Oglesby, D., Marin, E., Antonyraj, A., Toghiani, H., Wang, P., & Horstemeyer, M. (2010). Structure-Property Relations of a Styrene-Butadiene Rubber Under Monotonic and Fatigue Loading Conditions. GVSETS 2010. Dearborn, MI.

Jordon, J. B., Horstemeyer, M., Badarinarayn, H., & Grantham, J. (2009). FATIGUE OF MAGNESIUM AZ31 IN FRICTION STIR SPOT WELDS. Proceedings of the ASME International Mechanical Engineering Congress & Exposition. Lake Buena Vista, Florida, USA. [Abstract]

Antonyraj, A., Morgan, W., German, R. M., Wang, P., & Horstemeyer, M. (2009). Sintering Response of Al6061 by Rapid Solidification: Effect of Additives. Int. Conf. Powder Met. Particulate Mater.. Florida: MPIF.

Begonia, M., Liao, J., Prabhu, R., Horstemeyer, M., & Williams, L. N. (2009). Structure-Property Relations in Porcine Brain Tissue: Strain Rate and Stress-State Dependence. Biomedical Engineering Society 2009. Pittsburgh, PA, USA.

Prabhu, R., Williams, L. N., Horstemeyer, M., & Liao, J. (2009). Traumatic Injury: Mechanical Response of Porcine Brain and Liver Tissue under High Strain Rate Tests. Biomedical Engineering Society 2009. Pittsburgh, PA, USA.

Oppedal, A. L., Kaschner, G., Capolungo, L., McCabe, R., Vogel, S., Brown, D., Tome, C., & Horstemeyer, M. (2009). Modeling Texture, Twinning, and Hardening Evolution During Strain Path Reloads in Pure Magnesium. TMS 2009. TMS 2009; San Francisco, CA.

Groh, S., Marin, E., & Horstemeyer, M. (2008). Multiscale Modeling of the Plasticity in Al Single Crystal under Compression. In Plasticity 2008 (Ed.), Hawaii.

Oppedal, A. L., Horstemeyer, M., Oglesby, D., & El Kadiri, H. (2005). Magnesium Alloys with Temperature Dependence on Damage Evolution. MRS Fall Meeting 2005. MRS Fall Meeting 2005; Boston, MA.

Peer-Reviewed Conference Papers
Aslam, I., Li, B., Martens, R., Goodwin, J., Rhee, H., Horstemeyer, M., & Goodwin, F. (2016). Site-specific studies on the interfacial structures of galvanized dual phase steels. Characterization of Minerals, Metals, and Materials. Wannendale, PA. 1, 183-192.

McClelland, Z., Li, B., Horstemeyer, S., Horstemeyer, M., & Oppedal, A. L. (2016). Effects of Homogenization on Structure Property Relations of an Indirect Extruded ZE20 Mg Alloy. In A. Singh, K, Solanki, M. V. Manuel, N. R. Neelameggham (Eds.), Magnesium Technology 2016. Nashville, TN: Wiley-TMS. 141--146. [Abstract]

Whittington, W. R., Oppedal, A. L., Francis, D.K., & Horstemeyer, M. (2015). Robust Intermediate Strain Rate Experimentation Using the Serpentine Transmitted Bar. SEM Annual Conference Proceedings 2015. Costa Mesa, CA: Society for Experimental Mechanics, Inc. and Springer. [Abstract]

Cho, H., Horstemeyer, M., Hammi, Y., & Francis, D.K. (2015). Finite Element Model for Plymouth Tub Processing Using Internal State Variables. Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME). Colorado Springs, CO: John Wiley & Sons. [Abstract]

Lee, N, Prabhu, R., Williams, L. N., & Horstemeyer, M. (2014). The Role of the Hyoid Apparatuses of Woodpeckers for Energy Dissipation. Southern Biomedical Engineering Conference. Gulfport, MS.

Sukhija, N., Haupt, T., & Horstemeyer, M. (2014). Enhancing and Supporting Integrated Computational Material Science Engineering Education. proceedings of the 121st American Society for Engineering Education Annual Conference & Exposition (ASEE 2014). Indianapolis, IN.

Ladner, I. S., Johnson, K., Horstemeyer, M., Williams, L. N., Liao, J., & Prabhu, R. (2013). Simulation Based Design and Analysis of Helmet-to-Helmet Collision. Proceedings of the ASME Summer Bioengineering Conference. Sunriver, OR: ASME SBC.

Johnson, K. L., Trim, W., Horstemeyer, M., Williams, L. N., Liao, J., & Prabhu, R. (2013). Examination of the Geometric Effects on Stress Wave Propagation and Applications in Football Helmet Design. Proceedings of the ASME Summer Bioengineering Conference. Sunriver, OR: ASME SBC.

Bertucci, R., Prabhu, R., Horstemeyer, M., Sheng, J., Liao, J., & Williams, L. N. (2013). Validation of Finite Element Lower Extremity Model Using Drop Tower Testing. Proceedings of the ASME Summer Bioengineering Conference. Sunriver, OR: ASME SBC.

Wang, B., Bertucci, R., Li, B., Prabhu, R., Horstemeyer, M., Sheng, J., Liao, J., & Williams, L. N. (2013). Effect of Thermosensitive Hydrogel Injection on Mechanical Behavior of Porcine Myocardium. Proceedings of the ASME Summer Bioengineering Conference. Sunriver, OR: ASME SBC.

Ma, Q., Li, B., Oppedal, A. L., Wang, P., Luo, A., & Horstemeyer, M. (2013). An Experimental and Numerical Study of the Microstructural and Mechanical Properties of an Extruded Magnesium Alloy at 450 &Deg;C and Varied Strain Rates. SAE Technical Paper. Detroit, MI: SAE International. DOI:10.4271/2013-01-0976. [Abstract]

Lugo, M., Jordon, J. B., Bernard, J.D., & Horstemeyer, M. (2013). Microstructure-sensitive Fatigue Modeling of an Extruded AM30 Magnesium Alloy. SAE 2013 World Congress and Exhibition. Detroit, MI. 2.

Ma, Q., Horstemeyer, S., Li, B., McClelland, Z., Wang, P., & Horstemeyer, M. (2013). Microstructure and Texture Evolution in a Magnesium Alloy during Extrusion at Various Extrusion Speeds. Magnesium Technology, TMS 2013. San Antonio, TX. 95-99.

Ma, Q., Mao, W., Li, B., Wang, P., & Horstemeyer, M. (2013). Grain Subdivision and Its Effect on Texture Evolution in an Aluminum Alloy under Plane Strain Compression. Light Metals. TMS 2013, San Antonio, TX. 351-356.

Li, B., Horstemeyer, S., Oppedal, A. L., Wang, P., & Horstemeyer, M. (2013). Inverse Strain Rate Sensitivity of Bendability of an AZ31 Sheet in Three-point Bending. In N. Hort, S. N. Mathadhu, N. R. Neelameggham, M. Alderman (Eds.), Magnesium Technology 2013. San Antonio, TX: John Wiley & Sons, Inc., Hoboken, NJ, USA. DOI:10.1002/9781118663004.ch21. [Document]

Asle Zaeem, M., Nouranian, S., & Horstemeyer, M. (2012). Simulation of Polymer Crystal Growth with Various Morphologies Using a Phase-Field Model. Conference Paper, the 2012 Annual Meeting of the American Institute of Chemical Engineers (AIChE), October 28-November 2. Pittsburg, PA. [Abstract] [Document]

Tang, T., Felicelli, S. D., Myers, O., & Horstemeyer, M. (2012). A Variational Asymptotic Approach for the Effective Magnetostriction of Magnetostrictive Composites. Proceeding of 2012 ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems. Stone Mountain, GA.

Baird, J., Li, B., Parast, S., Horstemeyer, M., Horstemeyer, S., El Kadiri, H., & Wang, P. (2012). Anomalous Twin Bands in AZ31 Magnesium Sheet Bending. Magnesium Technology. Orlando, FL.

Ma, Q., Li, B., Oppedal, A. L., Whittington, W. R., Horstemeyer, S., Marin, E., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). Effect of Strain Rate on Dynamic Recrystallization in a Magnesium Alloy under Compression at High Temperature. Magnesium Technology 2012, Proceddings of 2012 TMS Annual Meeting and Exhibition. Orlando, FL.

Tang, T., Horstemeyer, M., & Wang, P. (2011). Micromechanical Analysis of Influences of Agglomerated Carbon Nanotube Interphase on the Effective Material Properties of a Three-phase Piezoelectric Nanocomposite. Proceedings of 2012 TMS Annual Meeting & Exhibition. Orlando, FL.

Bertucci, R., Gilbrech, R., Mao, M., Horstemeyer, M., Liao, J., Prabhu, R., & Williams, L. N. (2011). Development of a Lower Extremity Model at Blast Conditions. HFM-207 NATO Symposium on Blast Injury. Nova Scotia. 17. [Abstract]

Asle Zaeem, M., El Kadiri, H., Horstemeyer, M., & Wang, P. (2011). The Roles of Grain Boundary Energy Anisotropy and Second-Phase Particles on Grain Growth in Polycrystalline Materials. 4th Int. Multi-Conference on Eng. and Tech. Innovation. Orlando, USA. 180-182.

Prabhu, R., Steele, G., Horstemeyer, M., Ryland, S., Colebeck, E. E., Whittington, W. R., Williams, L. N., & Liao, J. (2011). Uncertainty analysis of the mechanical response of porcine brain at high strain rate compression. ASME 2011 Summer Bioengineering Conference. Farmington, PA.

Ryland, S., Patnaik, S.S, Prabhu, R., Horstemeyer, M., Liao, J., & Williams, L. N. (2011). Development of a Finite Element Model for Porcine Scalp. Proceedings of the ASME Summer Bioengineering Conference 2011. Farmington, PA: ASME. .(.), .

Bouvard, J.-L., Bouvard, C., Tschopp, M. A., Denton, B., & Horstemeyer, M. (2011). Simulation of Impact Tests on Polycarbonate at Different Strain Rates and Temperatures. SEM 2011 proceedings. Uncasville, CT.

Kim, S., El Kadiri, H., & Horstemeyer, M. (2011). Nucleation Mechanism for Shuffling Dominated Twinning in Magnesium. Proceedings of the 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]

Liyanage, Laalitha S. I., Houze, J., Tschopp, M. A., Kim, S., Baskes, M., & Horstemeyer, M. (2011). Modified Embedded Atom Method Potential for Fe-C System. APS march meeting 2011. Dallas, TX: American Physical Society. [Abstract] [Document Site]

Moitra, A., Solanki, K.N., & Horstemeyer, M. (2011). Size Scale Effect on the Deformation of 3D Nanocrystalline Magnesium. Proceedings of the TMS 2011. San Diego, CA. [Abstract]

Asle Zaeem, M., El Kadiri, H., Mesarovic, S. D., Wang, P., & Horstemeyer, M. (2011). A Finite Element-Phase Field Study of Solid State Phase Transformation: Coarsening of Coherent Precipitates and Instability of Multilayer Thin Films. TMS 2011 Annual Meeting & Exhibition. San Diego, CA. [Abstract]

Lugo, M., Tschopp, M. A., Jordon, J. B., & Horstemeyer, M. (2011). Microstructure Relationship in the Damage Evolution Process of an AZ61 Magnesium Alloy. TMS 2011 Conference Proceedings. TMS 2011, San Diego, CA.

Tschopp, M. A., Bouvard, J.-L., Ward, D. K., & Horstemeyer, M. (2011). Atomic Scale Deformation Mechanisms of Amorphous Polyethylene under Tensile Loading. TMS 2011 Proceedings. TMS 2011, San Diego, CA. [Abstract] [Document]

Oppedal, A. L., El Kadiri, H., Tomé, C. N., Baird, J., Vogel, S. C., & Horstemeyer, M. (2011). Limitation of Current Hardening Models in Predicting Anisotropy by Twinning in Hcp Metals: Application to a Rod-Textured AM30. In W. H. Sillekens, S. R. Agnew, N. R. Neelameggham, S. N. Mathaudhu (Eds.), Magnesium Technology 2011. San Diego, CA: TMS (The Minerals, Metals & Materials Society). 313-320. [Document]

Parkar, A. A, Bouvard, C., Marin, E., Horstemeyer, S., Horstemeyer, M., & Wang, P. (2011). Comprehensive Thermo-Mechanical Validation of Extrusion Simulation Cycle for Al 1100 Using HyperXtrude. In Subodh Das; Zhengdong Long; Tongguang Zhai (Eds.), TMS Proceedings CD-ROM: Aluminum Alloys: Fabrication, Characterization and Applications. San Diego, CA: TMS. [Abstract]

Kim, S., Kim, S., & Horstemeyer, M. (2011). Vanadium Effects on a BCC Iron Sigma 3 Grain Boundary Strength. Proceedings of the 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]

Tang, T., Kim, S., Horstemeyer, M., & Wang, P. (2011). A Molecular Dynamics Study of Fracture Behavior in Magnesium Single Crystal. Proceedings of the 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]

Martin, H. J., Walton, C. A., Danzy, J., Hicks, A., Horstemeyer, M., & Wang, P. (2010). Comparing the Corrosion Effects of Two Environments on As-Cast and Extruded Magnesium Alloys. TMS Annual Meeting - Magnesium Technology 2011. San Diego, CA.

Tang, T., Kim, S., Horstemeyer, M., & Wang, P. (2010). A Molecular Dynamics Study of Fracture Behavior in Magnesium Single Crystal. Proceedings of 2011 TMS Annual Meeting & Exhibition. San Diego, California.

Tang, T., Horstemeyer, M., Jordon, J. B., & Wang, P. (2010). Stress Intensity Factor Solutions for Friction Stir Spot Welds of Magnesium AZ31 Alloy. Proceedings of 2011 TMS Annual Meeting & Exhibition. San Diego, CA.

Ma, Q., Marin, E., Antonyraj, A., Hammi, Y., Wang, P., & Horstemeyer, M. (2010). On Predicting the Channel Die Compression Behavior of HCP Magnesium AM30 Using Crystal Plasticity FEM. Magnesium Technology 2011, 583-587. Proceddings of 2011 TMS Annual Meeting and Exhibition. San Diego, California, USA.

Ma, Q., El Kadiri, H., Oppedal, A. L., Baird, J., & Horstemeyer, M. (2010). Twinning Multiplicity in an AM30 Magnesium Alloy Under Uniaxial Compression. Magnesium Technology 2011, 301-305. Proceddings of 2011 TMS Annual Meeting and Exhibition. San Diego, CA.

Antonyraj, A., Marin, E., Ma, Q., Wang, P., Horstemeyer, M., & King, R. (2010). Re-Crystallization Studies of a Channel-Die Compressed AM30 Magnesium Alloy. TMS 2011. California. [Document Site]

Bhatia, M., Tschopp, M. A., Solanki, K.N., Moitra, A., & Horstemeyer, M. (2010). Deformation of Nanovoid in a Single Crystal Aluminum. Proceedings of the TMS MS&T 2010. TMS MS&T 2010, Houston, TX. [Abstract]

Xue, Y., Jordon, J. B., & Horstemeyer, M. (2010). Physics-based Multistage Fatigue Model for Fatigue in Notched Structures. TMS Annual Meeting. Seattle, WA.

Jablonski, D., Grundy, D., Horstemeyer, M., Sheiretov, Y., Solanki, K.N., Zilberstein, V., Goldfine, N., & Contag, G. (2010). Detection, Monitoring, and Measurement of Short Surface Fatigue Cracks. International Conference of Fatigue. Hyannis, MA.

Parkar, A. A, Bouvard, C., Marin, E., Horstemeyer, S., Wang, P., & Horstemeyer, M. (2010). Comprehensive Thermo-Mechanical Validation of Extrusion Simulation Cycle for Al 1100 Using HyperXtrude. Aluminum Alloys: Fabrication, Characterization and Applications. 2011 TMS Annual Meeting & Exhibition (In Press). [Abstract]

Tschopp, M. A., & Horstemeyer, M. (2010). Computational Framework for Assessing Grain Boundary Structure-Property Relationships at the Nanoscale. TMS Proceedings. TMS MS&T 2010. Houston, TX.

Tschopp, M. A., Horstemeyer, M., Gao, F., Sun, X., & Khaleel, M. (2010). Influence of Grain Boundary Character on Point Defect Formation Energies in BCC Fe. TMS Proceedings. TMS MS&T 2010, Houston, TX.

Brown, H., Bouvard, J.-L., Oglesby, D., Marin, E., Francis, D.K., Antonyraj, A., Toghiani, H., Wang, P., Horstemeyer, M., & Castanier, M. P. (2010). Mechanical Behavior and Fatigue Studies of Rubber Components in Army Tracked Vehicles. GVSETS 2010. Dearborn, MI. [Document Site]

Bouvard, J.-L., Ward, D. K., Marin, E., Bammann, D., & Horstemeyer, M. (2010). Development of an Internal State Variable Model to Describe the Mechanical Behavior of Amorphous Polymer and Its Application to Impact Testing. SEM 2010 proceedings. SEM 2010-Mechanics of Time-Dependent Materials Symposia, Indianapolis.

Moitra, A., Kim, S., Kim, S., Park, S. J., German, R., & Horstemeyer, M. (2010). Investigation on Sintering Mechanism of Nanoscale Tungsten Powder Based on Atomistic Simulation. AIP Conference Proceedings. Pohang, Korea. 1252, 1176. [Abstract]

Ciorba, F. M., Groh, S., & Horstemeyer, M. (2010). Parallelizing Discrete Dislocation Dynamics Simulations on Multi-Core Systems. International Conference on Computational Science (ICCS 2010). Amsterdam, The Netherlands: Procedia Computer Science. 1(1), 2129-2137. [Abstract] [Document Site]

Hammi, Y., Stone, T.W., Allison, P., & Horstemeyer, M. (2010). Fatigue Modeling of a Powder Metallurgy Main Bearing Cap. 2010 SIMULIA Customer Conference. Providence, RI: 3DS SIMULIA. [Abstract]

Prabhu, R., Horstemeyer, M., McCollum, M., Whittington, W. R., Bouvard, J.-L., Sherburn, J. A., Williams, L. N., Marin, E., & Liao, J. (2010). Traumatic Brain Injury: Coupled Experiment/Finite Element Simulation On High Rate Mechanical Response Of Porcine Brain. Proceedings of the ASME 2010 Summer Bioengineering Conference (SBC2010). Naples, Florida, USA: ASME.

Jordon, J. B., Horstemeyer, M., Grantham, J., & Badarinarayan, H. (2010). Fatigue Evaluation of Friction Stir Spot Welds in Magnesium Sheets. 2010 TMS Annual Meeting and Exhibition. 2010 TMS Annual Meeting and Exhibition. [Abstract]

Bernard, J.D., Jordon, J. B., Horstemeyer, M., & El Kadiri, H. (2010). Structure-Property Evaluation of Fatigue Damage in a Magnesium AM30 Alloy. 2010 TMS Annual Meeting and Exhibition. TMS 2010 Seattle, WA. [Abstract]

Tang, T., Kim, S., & Horstemeyer, M. (2010). Atomistic Simulations of Fatigue Crack Growth and the Influence of Temperature on Fatigue Behavior in Magnesium Crystals. Proceedings of 2010 TMS Annual Meeting & Exhibition. Seattle, Washington, USA.

Ma, Q., El Kadiri, H., Horstemeyer, M., & Wang, P. (2010). Plasticity in a Rod-Textured Extruded Mg AM30 Alloy. Magnesium Technology 2010, 57-62. Proceddings of 2010 TMS Annual Meeting and Exhibition. Seattle, Washington, USA.

Tang, T., Horstemeyer, M., & Kim, S. (2009). Atomistic Modeling of Fatigue Crack Growth in Magnesium Single Crystals under Cyclic Loading. Proceedings of 2009 ASME International Mechanical Engineering congress and Exposition. Lake Buena Vista, Florida. [Abstract]

Tang, T., Kim, S., & Horstemeyer, M. (2009). Atomistic Modeling of Fatigue Crack Growth in Magnesium Single Crystal under Cyclic Loading. Proceedings of 2009 ASME International Mechanical Engineering Congress and Exposition. Lake Buena Vista, Florida, USA.

Bouvard, J.-L., Marin, E., Horstemeyer, M., Ward, D. K., & Bammann, D. (2009). Experimental Testing and Numerical Model of Thermoplastics: PC, PP, and ABS. CFM09. Marseille, France.

Stone, T.W., Hammi, Y., Carino, R.L., & Horstemeyer, M. (2009). Modeling for Powder Metallurgy Component Design and Performance Prediction. Advances in Powder Metallurgy & Particulate Materials. Las Vegas, NV: MPIF. [Abstract]

Brister, K., Horstemeyer, M., Acar, E., & Solanki, K.N. (2009). Multi-Objective Design Optimization Using a Damage Material Model Applied to Light Weighting a Formula SAE Car Suspension Component. 2009 SAE International, Paper No. 2009-01-0348. 2009 SAE International.

Begonia, M., Liao, J., Horstemeyer, M., & Williams, L. N. (2009). Strain Rate Dependence In The Structure Property Relationship Of Porcine Brain Session Name: Injury Mechanics. ASME 2009 Summer Bioengineering Conference Proceedings. Lake Tahoe, CA.

Clemmer, J., Liao, J., Horstemeyer, M., & Williams, L. N. (2009). Strain Rate Effects On Structure-Property Relationship In The Rabbit Patellar Tendon. ASME 2009 Summer Bioengineering Conference Proceedings. Lake Tahoe, CA.

Priddy, L. B., Prabhu, R., Marin, E., Williams, L. N., Horstemeyer, M., & Liao, J. (2009). TRAUMATIC INJURY: MECHANICAL RESPONSE OF PORCINE LIVER TISSUE UNDER HIGH STRAIN RATE COMPRESSION TESTING. ASME 2009 Summer Bioengineering Conference Proceedings. Lake Tahoe, CA.

Prabhu, R., Horstemeyer, M., Marin, E., Liao, J., Tucker, M.T., & Williams, L. N. (2009). TRAUMATIC BRAIN INJURY: MECHANICAL RESPONSE OF PORCINE BRAIN UNDER HIGH STRAIN RATE TESTS. ASME 2009 Summer Bioengineering Conference Proceedings. Lake Tahoe, CA.

Bouvard, J.-L., Brown, H., Marin, E., Wang, P., & Horstemeyer, M. (2009). Mechanical Testing and Material Modeling of Thermoplastics: Polycarbonate, Polypropylene and Acrylonitrile-Butadiene-Styrene. 2008 MRS Fall Meeting Symposium W proceedings. MRS.

Wang, L., Pratt, P., Felicelli, S. D., El Kadiri, H., Wang, P., & Horstemeyer, M. (2009). Experimental Analysis of Porosity Formation in Laser-assisted Powder Deposition Process. Supplemental Proceedings: Volume 1: Fabrication, Materials Processing and Properties. TMS, Warrendale, PA. 389-396. [Document]

Xue, Y., Lugo, M., Pascu, A., & Horstemeyer, M. (2009). Fatigue Mechanism and Multistage Fatigue Modeling for Wrought Mg-3Al-1Zn. TMS 2009 - 138th Annual Meeting and Exhibition. San Francisco, CA. 1(2009), 41-48.

Moitra, A., Kim, S., Kim, S., Park, S. J., German, R., & Horstemeyer, M. (2008). Atomistic Scale Study on Effect of Crystalline Misalignment on Densification during Sintering Nano Scale Tungsten Powder. International Conference on Sintering - Sintering 2008. La Jolla, CA. [Abstract]

Sealy, M. P., Guo, Y., & Horstemeyer, M. (2008). Fabrication and Finite Element Analysis of Micro Dents Using Nano-Laser Shock Peening. ASME. Evanston, IL.

Acar, E., Solanki, K.N., Rais-Rohani, M., & Horstemeyer, M. (2008). Uncertainty Analysis of Damage Evolution Computed through Microstructure-Property Relations. ASME 2008 IDETC & CIEC. New York City, NY: ASME.

Sherburn, J. A., Horstemeyer, M., & Solanki, K.N. (2008). Simulation Analysis of Glacial Surging in the Des Moines Ice Lobe. Proceedings of the sixth international conference on creationism, ICC 2008. San Diego, CA. [Abstract]

Stone, T.W., Tucker, L., Williams, T. N., Hammi, Y., El Kadiri, H., & Horstemeyer, M. (2008). Comparison of Density Measurement Techniques for Large P/M Components. Advances in Powder Metallurgy & Particulate Materials. Princeton, NJ: Metal Powder Industries Federation. 11-84-11-96. [Abstract]

Hammi, Y., Stone, T.W., Arias-Meza, L., Allison, P., & Horstemeyer, M. (2008). Modeling for Powder Metallurgy Component Design and Performance Prediction. MPIF/APMI 2008 World Congress on Powder Metallurgy & Particulate Materia. Gaylord National Hotel, Washington, DC. 1-96 –1-110. [Abstract]

Bouvard, J.-L., Xue, Y., Taylor, P., Marin, E., Horstemeyer, M., & Oglesby, D. (2008). Multistage Fatigue Model on Viscoelastic Materials at Elevated Temperatures. MTDM 08. Monterey, CA.

Alvarez, R., Ruiz, A., & Horstemeyer, M. (2008). Pitting Corrosion Study in an AE44 Magnesium Alloy. NACE International Conference. New Orleans, LA.

Wang, K., Xue, Y., Zhang, H., & Horstemeyer, M. (2007). Micromechanical Simulation on Hygro-Mechanical Properties of Woodfiber-Reinforced Plastic Composites. 9th International Conference on Wood & Biofiber Plastic Composites, May 21-23, 2007, Madison WI. ISBN 1-892529-50-5. 339-346. [Abstract]

Xue, Y., Du, Y., Elder, S., Sham, D., Horstemeyer, M., & Zhang, J. (2007). Statistical Tensile Properties of Kenaf Fibers and Composites. 9th International Conference on Wood & Biofiber Plastic Composites, May 21-23, 2007, Madison WI. Madison, WA: Forest Products Society, INSB 1-892529-50-5. 161-168.

Shi, S., Lee, S., & Horstemeyer, M. (2007). Kenaf Bast Fiber Retting and Inorganic Nanoparticle Impregnation Treatment for Natural Fiber/Polymer Composites. University of Washington, Seattle, Washington, USA: 22nd Annual American Society for Composite Technical Conference.

Acar, E., Solanki, K.N., Rais-Rohani, M., & Horstemeyer, M. (2007). Probabilistic Product-Process Design Optimization of Automotive Structures Using Multiscale Material Models. 14th Asia Pacific Automotive Engineering Conference. Hanoi, Vietnam.

Stone, T.W., Jelinek, B., Gullett, P., Kim, S., & Horstemeyer, M. (2007). Molecular Dynamics Simulations of the Compressive Behavior of Alpha-Fe and Fe-Cu Nanocrystalline Materials. Advances in Powder Metallurgy & Particulate Materials. Denver, CO: MPIF. 1.15-1.24. [Abstract]

Solanki, K.N., Acar, E., Rais-Rohani, M., & Horstemeyer, M. (2007). Reliability-Based Structural Optimization Using a Multiscale Material Model. 48th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference. Honolulu, HI: AIAA. [Abstract]

Xue, Y., Wright, A., Solanki, K.N., Horstemeyer, M., & McDowell, D. (2007). Micromechanical Simulation of Cyclic Plasticity at Inclusion Particles with Pre-Over Straining. Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA-2007-2341 . Honolulu, Hawaii. [Abstract]

Xue, Y., Solanki, K.N., Steele, G., & Horstemeyer, M. (2007). Quantitative Uncertainty Analysis for a Mechanistic Multistage Fatigue Model . Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA-2007-1982 . Honolulu, Hawaii. [Abstract]

Potirniche, G., Middleton, J., Gomez, R., Bain, B., El Kadiri, H., Rhee, H., Williams, T. N., Wang, P., & Horstemeyer, M. (2007). A Study of Monotonic and Cyclic Properties of Lens Fabricated 4140 and AISI 4140 Steel Alloys. Materials Processing and Manufacturing Division Symposium. Orlando, Fl.

Horstemeyer, M., & Solanki, K.N. (2007). Internal State Variable Modeling of Structure-Property Relationships in Deformed Microstructures. The Minerals, Metals, and Materials Society Annual Meeting & Exhibition. Orlando, FL.

Burton, C., Horstemeyer, M., Wang, P., & Shahbazian-Yassar, R. (2007). Rolling History Microstructural Analysis of Texture Gradients for 6022 Aluminum Sheet. 136th TMS Annual Meeting. Orlando, Fl.

Potirniche, G., Middleton, J., El Kadiri, H., Rhee, H., Wang, P., & Horstemeyer, M. (2007). Fatigue Damage in Laser Engineered Net Shaping Manufactured Materials. TMS 2007 Annual Meeting & Exhibition. Orlando, Fl.

Querin, J., Schneider, J.A., & Horstemeyer, M. (2007). OIM Characterization of Banded Regions in a Friction Stir Weld. TMS Annual Meeting. Orlando, FL.

Shahbazian-Yassar, R., Mesarovic, S. D., Field, D. P., Horstemeyer, M., & Wang, P. (2006). Application of Geometrically Necessary Dislocations in Modeling of Hardening Behavior of Precipitation Hardening Crystals. MRS’ 06 Fall Meeting. Boston, Ma.

Crapps, J., Fang, H., & Horstemeyer, M. (2006). Numerical Simulation and Optimization of a Tee Shaped Tube Hydroforming Process. Proceedings of the International Conference on Manufacturing Science and Engineering. Ypsilanti, MI.

Wang, L., Felicelli, S. D., Gooroochurn, Y., Wang, P., & Horstemeyer, M. (2006). Numerical Simulation of the Temperature Distribution and Solid-Phase Evolution in the LENS Process. Proceedings of The Seventeenth Solid Freeform Fabrication Symposium. Austin, TX. 453-463. [Document]

Stone, T.W., Arias-Meza, L., Hammi, Y., & Horstemeyer, M. (2006). Multiscale Modeling of Powder Metallurgy Process. Advances in Powder Metallurgy & Particulate Materials. San Diego, CA: MPIF. 1(1), 1-41 -1-54.

Xue, R., El Kadiri, H., Horstemeyer, M., Fan, J., & McDowell, D. L. (2006). Fatigue and Fracture Mechanism of Cast AE44 Magnesium Alloys. Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. St. Louis, MO.

Potirniche, G., Horstemeyer, M., & Gullett, P. (2006). Fatigue Crack Growth Simulations in Nanocrystalline Materials. 9th International Fatigue Congress. Atlanta, GA.

Wang, P., El Kadiri, H., & Horstemeyer, M. (2006). Fracture Behavior of Al-Mg Alloys Deformed at Elevated Temperature. 47th AIAA/ASME/ASCE/AHS/ASC Structure, structure Dynamics, and Materials Conference. Newport, RI.

Burton, C. L., Jones, M. K., Oglesby, D., Oppedal, A. L., Chandler, M. Q., & Horstemeyer, M. (2006). Failure Analysis of a Cast A380 Aluminum Alloy Casting Using a Microstructurally Based Fatigue Model. 110th Metalcasting Congress. Columbus, OH.

Wang, P., Potirniche, G., El Kadiri, H., & Horstemeyer, M. (2006). Modeling 3D Damage Progression of Laser Deposited Materials. SPIE Defense and Security Symposium. Orlando, Fl.

Hammi, Y., Stone, T.W., & Horstemeyer, M. (2006). Constitutive Modeling of Metal Powder Behavior. SAE 2005 Transactions Journal of Materials & Manufacturing. Warrendale, PA.

Wang, P., El Kadiri, H., Potirniche, G., & Horstemeyer, M. (2006). Characterization and Modeling of 3-Dimensional Damage Progression of Laser-Deposited Iron-based Materials Using X-ray Tomography. 2006 TMS Annual Meeting and Exhibition. San Antonio, Tx.

Hammi, Y., Stone, T.W., & Horstemeyer, M. (2005). Constitutive Modeling for Powder Compaction and Densification. Advances in Powder Metallurgy & Particulate Materials. Montreal, Canada: MPIF. 1(1), 1-38 -1-51.

Querin, J., Schneider, J.A., & Horstemeyer, M. (2005). Use of EBSD to Quantify the Microstructural Damage in Aluminum Alloys Under Monotonic Loading. TMS Letters. Orlando, FL.

Horstemeyer, M., Potirniche, G., Hearndon, J. L., & Ling, X. (2005). On the Void Growth in Single Crystals. Proceedings of the 2005 International Plasticity Conference. Kauai, HI.

Horstemeyer, M., Solanki, K.N., & Steele, G. (2005). Uncertainty Methodologies to Characterize a Damage Evolution Model. Plasticity 2005. Kauai (Hawaii).

Fang, H., & Horstemeyer, M. (2005). Metamodeling with Radial Basis Functions. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, v 5, Collec. of Technic. Pap. - 46th AIAA/ASME/ASCE/AHS/ASC Struc., Struct. Dynam. and Mater. Conf., 13th AIAA/ASME/AHS Adap. Struc. Conf., 7. Austin, TX, United States: American Inst. Aeronautics and Astronautics Inc.. 3186-3197. [Abstract]

Guo, Y. B., Wen, Q., & Horstemeyer, M. (2004). Using Internal State Variable Plasticity to Determine Dynamic Loading History Effects in Manufacturing Processes. Winter ASME Meeting. Anaheim, CA.

Fang, H., Solanki, K.N., & Horstemeyer, M. (2004). Energy-based Crashworthiness Optimization for Multiple Vehicle Impacts. IMECE2004-59123, Proceeding of IMECE 2004: International Mechanical Engineering Congress & Exposition. Anaheim, California.

Fang, H., Solanki, K.N., Horstemeyer, M., & Rais-Rohani, M. (2004). Multi-impact Crashworthiness Optimization with Full-scale Finite Element Simulations. 6th World Congress on Computational Mechanics in Conjunction APCOM'04. Beijing, China.

Fang, H., Horstemeyer, M., & Liu, Z. (2004). Multidisciplinary Crashworthiness Optimization by Unified Finite Element Model. 4th International Conference on Engineering Computational Technology. Beijing, China.

Fang, H., Rais-Rohani, M., & Horstemeyer, M. (2004). Multi-Objective Crashworthiness Optimization with Radial Basis Functions. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Albany, NY: AIAA.

Fang, H., Liu, Z., & Horstemeyer, M. (2004). Reliability Based Finite Element Simulations for Performance Evaluation of Truck-Barrier Impacts. 8th International LS-DYNA Users Conference. Dearborn, MI.

Solanki, K.N., Oglesby, D., Burton, C., Fang, H., & Horstemeyer, M. (2004). Crashworthiness Simulations Comparing PAM-CRASH and LS-DYNA. The 2004 SAE World Congress, Paper No. 148. Detroit, Michigan.

Potirniche, G., Daniewicz, S., & Horstemeyer, M. (2003). Crystal Plasticity in Cyclic Fatigue. Winter ASME Meeting. Washington, D.C.

Potirniche, G., Harris, J. J., Horstemeyer, M., & Daniewicz, S. (2003). Prediction of S/N Curves for Aluminum Alloy 2024 Using Fatigue Crack Growth Methodologies. ASM Annual Meeting. Pittsburgh, PA.

Yan, L., Khraishi, T. A., Shen, Y. L., & Horstemeyer, M. (2003). A Numerical Method for the Treatment of Image Stresses in Dislocation Dynamics Simulations. Proceedings of the Second M.I.T. Conference on Computational Fluid and Solid Mechanics. Cambridge, MA.

Balasundaram, A., Gokhale, A. M., Shan, Z., Graham, S., & Horstemeyer, M. (2002). Quantitative Characterization of Particle Rotations During Plastic Deformation of Aluminum Alloys. Aluminum 2002: Proceedings of TMS Symposium on Automotive Alloys. Seattle, WA.

Balasundaram, A., Gokhale, A. M., Shan, Z., Graham, S., & Horstemeyer, M. (2002). Effect of Stress and Strain on the Particle Cracking Damage in 5086 Al-Alloy. Aluminum 2002: Proceedings of TMS Symposium on Automotive Alloys. Seattle, WA.

Horstemeyer, M., Baskes, M. I., & Plimpton, S. J. (2002). Nanoscale Plasticity Using Atomistic Simulations. Proceedings of Plasticity, Damage, and Fracture at Macro, Micro, and Nano Scales. Aruba.

Horstemeyer, M. (2002). Control Arm Simulations Using Void Nucleation, Growth, and Coalescence. Proceedings of Plasticity, Damage, and Fracture at Macro, Micro, and Nano Scales. Aruba.

Horstemeyer, M., Gall, K., Dolan, K. W., Waters, A., Haskins, J. J., Perkins, D. E., Gokhale, A. M., & Dighe, M. D. (2001). Microstructure-Property Damage Analysis of Notch Tensile Tests. ICF 2001. Hawaii.

Settgast, R. R., Somerday, B. P., Horstemeyer, M., & Zimmerman, J. A. (2001). Boundary Effects in Atomistic Modeling of Void Growth and Coalescence in Nickel. MRS 2001. Boston, MA.

Gullett, P., Horstemeyer, M., Bammann, D., & Baskes, M. I. (2001). A Comparison of Atomistic and Elastic Continuum Based Shear Stress Distributions Near an Edge Dislocation. Proceedings of the International Conference on Computational Engineering and Science. Puerta Vallarta, Mexico.

Baskes, M. I., Horstemeyer, M., & Plimpton, S. J. (2001). Atomistic Simulations of Size Scale and Strain Rate Effects on Plasticity of Metals. ICCN 2001. Hilton Head, SC.

Agarewal, H., Gokhale, A. M., Graham, S., & Horstemeyer, M. (2001). Quantitative Characterization of Three-Dimensional Damage as a Function of Compressive Strain in Al 6061. Proceedings of Automotive Alloys 2001. New Orleans, LA.

Waters, A. M., Martz, H. E., Dolan, K. W., Horstemeyer, M., & Green, R. E. (2000). Stastical Void Analysis from CT Imagery with Applications to Damage Evolution in an AM60B Magnesium Alloy. 15th World Conference on Non Destructive Testing. Rome, Italy.

Regueiro, R., & Horstemeyer, M. (2000). Ta Analysis Using BCJ Modeling Framework. ASME Conference for High Strain Rate Applications.

Horstemeyer, M. (1999). Multi-Scale Analysis of Monotonically Loaded A356 Cast Aluminum Alloy. AFS. St. Louis, MO.

Fan, J., McDowell, D. L., & Horstemeyer, M. (1999). Multi-Scale Analysis of Cyclically Loaded A356 Cast Aluminum Alloy. AFS. St. Louis, MO.

Horstemeyer, M., Gall, K. A., & Degner, B. W. (1999). Damage Design Maps for a Cast A356 Aluminum Alloy. MRS Conference. Boston, MA.

Somerday, B. P., Pattillo, P. D., Horstemeyer, M., & Baskes, M. I. (1999). Atomistic Modeling of Void Growth and Coalescence in Ni+H. MRS Conference. Boston, MA.

Horstemeyer, M., & Baskes, M. I. (1999). High Strain Rate Single Crystal Atomistic Simulations. International Journal of Plasticity. Cancun, Mexico.

Horstemeyer, M., & Mosher, D. A. (1999). Damage Progression in Ductile Metals. International Journal of Plasticity. Cancun, Mexico.

Waters, A., Martz, H., Dolan, K., Horstemeyer, M., Rikard, D., & Green, R. (1999). Characterization of Damage Evolution in an AM60 Magnesium Alloy by Computed Tomography. 9th International Symposium on Nondestructive Characterization of Materials. Sydney, Australia.

Horstemeyer, M. (1998). Mechanical Property Characterization of A356 Cast Aluminum Alloy Under Monotonic Loads. American Foundry Society. Orlando, FL.

Fan, J., McDowell, D. L., & Horstemeyer, M. (1998). Micromechanics of Fatigue of Cast AL Alloys. TMS. Rosemont, IL.

Horstemeyer, M., & Mosher, D. A. (1998). High Strain Rate Effects on a Cast A356 Aluminum Alloy. TMS. Rosemont, IL.

Horstemeyer, M., & Jin, P. S. (1997). Damage Modeling of A356 Cast Aluminum. Proceedings of ISATA Conference. Florence, Italy.

Horstemeyer, M., Dike, J. J., Chiesa, M. L., Weingarten, L. I., Dawson, D., Bammann, D., Revelli, V. D., & Prantil, V. (1997). Use of an Internal State Variable Model for Underwater Explosion Simulations. Symposium of Underwater Explosion Phenomena. Dunfermline, Scotland.

Horstemeyer, M., & McDowell, D. L. (1995). Stress State and History Effects in Viscoplasticity at Finite Strain. Proceedings of ASME Materials Division.

Horstemeyer, M., & McDowell, D. L. (1995). Double Slip Polycrystal Plasticity and Complex Loading of OFHC Copper. Proceedings of 10th Conference of Engineering Mechanics. Boulder, CO.

Horstemeyer, M., Chiesa, M. L., & Bammann, D. (1994). Predicting Forming Limit Diagrams with Explicit and Implicit Finite Element Codes. Analysis of Autobody Stamping Technology.

Horstemeyer, M., McDowell, D. L., & Bammann, D. (1994). Torsional Softening and the Forming Limit Diagram. SAE Analysis of Autobody Stamping Technology. Detroit, MI.

Horstemeyer, M. (1993). Structural Analysis of a Submarine Using Statistical Design of Experiments. Advances in Numerical Simulation Techniques for Penetration and Perforation of Solids. ASME Winter Meeting.

Horstemeyer, M., Weingarten, L. I., & Trento, W. P. (1992). Modeling Underwater Explosions with an Eulerian Code. 63rd Shock and Vibration Symposium. Las Cruces, NM.

Horstemeyer, M., Weingarten, L. I., & Dike, J. J. (1992). Modeling Focused Blasts with a Hydrodynamic Code. 63rd Shock and Vibration Symposium. Las Cruces, NM.

Horstemeyer, M. (1992). Damage of HY100 Steel Plates from Oblique Constrained Blast Waves. Advances in Local Fracture/Damage Models for the Analysis of Engineering Problems. Tempe, AZ.

German, R., Houze, J., Kim, S., Horstemeyer, M., & Kim, S. G. (). Atomistic Simulations of Activated Sintering of Tungsten by Additives. Advances in Powder Metallurgy and Patriculate Materials. Princeton, NJ: Metal Powder Industries Federation. 1.70-1.75.

Shi, S., Lee, Y., & Horstemeyer, M. (). Natural Fiber Retting and Inorganic Nanoparticle Impregnation Treatment for Natural Fiber/Polymer Composites. University of Washington, Seattle, Washington, USA: 22nd Annual American Society for Composites Technical Conference.

Ling, X., Wang, P., & Horstemeyer, M. (). Issues in Modeling Transient Behavior of Multiple-pass Hot Rolling Process. 8th International Conference on Numerical Methods in Industrial Forming Processes. Columbus, Oh.

Gullett, P., Horstemeyer, M., Waters, A. M., & Frazier, K. F. (). Simulated Void Growth and Failure in AM60B Magnesium Tension Specimens. In D.R.J. Owen, E. Onate and B. Suarez (Eds.), COMPLAS VIII Fundmentals and Applications. Barcelona, Spain. 1211-1214.

Peer-Reviewed Conference Posters
Patnaik, S. S., Szasz, T., Prabhu, R., Rhee, H., Horstemeyer, M., Liao, J., & Williams, L. N. (2015). Dynamic Viscoelastic Properties of Porcine Patellar Tendon Tissue: A Study of Regional Variation and Frequency Dependent Behavior. Summer Biomechanics, Bioengineering, and Biotransport Conference. Snowbird, UT.

Bertucci, R., Prabhu, R., Horstemeyer, M., Liao, J., & Williams, L. N. (2015). Finite Element Analysis of Lower Extremity Military Boot Protection at Blast Condition. Summer Biomechanics, Bioengineering, and Biotransport Conference. Snowbird, UT.

Marin, E., Bouvard, C., Parkar, A. A, Ma, Q., Li, B., Wang, P., & Horstemeyer, M. (2011). Extrusion Modeling of AM30 Magnesium Alloy. 1st World Congress on Integrated Computational Materials Engineering. Seven Springs, PA.

Bertucci, R., Mao, Y., Gilbrech, R., Prabhu, R., Horstemeyer, M., Liao, J., & Williams, L. N. (2011). Development of a Lower Extremity Model for Finite Element Analysis at Blast Condition. ASME 2011 Summer Bioengineering Conference. Farmington, PA.

Martin, H. J., Walton, C. A., Danzy, J., Hicks, A., Horstemeyer, M., & Wang, P. (2010). Modeling the Corrosive Effects of Various Magnesium Alloys Exposed to Two Saltwater Environments. TMS Annual Meeting - Magnesium Technology 2011. San Diego, CA.

Antonyraj, A., Morgan, W., Bouvard, J.-L., Marin, E., Wang, P., Horstemeyer, M., & King, R. (2010). Microstructural Studies of Deformation and Damage Mechanisms in Thermoplastics. 10th Southern School of Computational Chemistry and Materials Science conference. Jackson, MS. [Document]

Tucker, M.T., Horstemeyer, M., Gullett, P., & Whittington, W. R. (2008). Anisotropic, Strain Rate, and Stress State Effects of AZ31B. Modeling & Simulation, Testing & Validation Conference. Warren, MI. [Abstract]

Pascu, A., Xue, Y. "., Smelser, N., Wang, L., Wang, P., & Horstemeyer, M. (2008). Cyclic-hardening and Fatigue Behavior of LENS Processed Metal. ASME 2008 International Mechanical Congress and Exposition (IMECE). Sheraton Boston Hotel, Boston, Massachusetts, United States: ASME. [Abstract]

Carrasquel, I., Horstemeyer, M., Solanki, K.N., & Burton, C. (2007). Microstructure-Property Charachterization of a Dodge Neon Passenger Car. Materials Science and Technology 2007 - Detroit MI. [Abstract]

Yassar, R., Mesarovic, S., Field, D. P., Horstemeyer, M., & Wang, P. (2006). Micromechanics of Hardening of Precipitation Hardening Materials. Search Engine Strategies Conference. San Jose, CA.

Yan, L., Khraishi, T., Shen, Y., & Horstemeyer, M. (2002). A Distributed Dislocation Method for Treating Free Surface Effects in 3D Dislocation Dynamics. 14th Annual Rio Grande Regional Symposium on Advanced Materials. Albequerque, NM.

Gullett, P., Horstemeyer, M., & Baskes, M. I. (). Discrete Gradient Operator for Computation of Local Atomic Strains. In Peter Gumbsch (Ed.), Third International Conference on Multiscale Materials Modeling. Freiburg, Germany. 170.

Non-Refereed Conference Abstracts
Nouranian, S., Tschopp, M. A., Gwaltney, S. R., Baskes, M. I., & Horstemeyer, M. (2012). An Interatomic Potential for Saturated Hydrocarbons Based on the Modified Embedded-atom Method. Third Biennial Symposium of Predictive Science & Technology in Mechanics & Materials. Center for Advanced Vehicular Systems, Mississippi State University, MS. [Abstract]

Bouvard, J.-L., Tschopp, M. A., Bammann, D., & Horstemeyer, M. (2011). Development of a Multiscale Strategy to Predict the Material Response of Polymers. ASME. Denvers, CO.

Non-Refereed Conference Papers
Walton, C. A., Martin, H. J., Horstemeyer, M., Whittington, W. R., & Wang, P. (2012). Corrosion-Stress Relaxation Effects on Surface and Tensile Properties of an AZ31 Magnesium Alloy. 2012 American Institute of Chemical Engineering Annual Meeting. Pittsburgh, PA.

Martin, H. J., Walton, C. A., Danzy, J., Hicks, A., Horstemeyer, M., & Wang, P. (2011). Modeling Individual and Bulk Pit Characteristics on Various Magnesium Alloys Exposed to Two Saltwater Environments. 2011 American Institute of Chemical Engineers Annual Meeting. Minneapolis, MN.

Martin, H. J., Danzy, J., Horstemeyer, M., & Wang, P. (2010). Comparing the Corrosion Effects of Two Environments on As-Cast AM60 and AZ91. 2010 American Institute of Chemical Engineers (AIChE) Annual Meeting. Salt Lake City, UT.

Martin, H. J., Walton, C. A., Danzy, J., Hicks, A., Horstemeyer, M., & Wang, P. (2010). Modeling the Corrosive Effects of Various Magnesium Alloys Exposed to Two Saltwater Environments. 2010 American Institute of Chemical Engineers (AIChE) Annual Meeting. Salt Lake City, UT.

Zhou, Y., Jeelani, S., Lacy, T., & Horstemeyer, M. (2008). Experimental Study on Thermal and Mechanical Properties of Clay Modified Carbon Fiber Reinforced Epoxy. Proceedings of the ASC 23rd Annual Technical Conference, Memphis, Tennessee, September 9-11, 2008.

Shaik, M. S., Zhou, Y., Lacy, T., & Horstemeyer, M. (2008). Experimental Study on Strain Rate Sensitivity of Aligned Carbon Nanofiber Reinforced Polypropylene. ICHMM-2008, Huangshan, China, June 3-8, 2008.

Jordon, J. B., Newman, J., Jr., Xue, Y., & Horstemeyer, M. (2006). Near Threshold Fatigue Crack Growth in 7075-T651 Aluminum Alloy. Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006. Saint Louis, MO: Society for Experimental Mechanics Inc. 4, 1742-1750. [Abstract]

Xue, Y., Jordon, J. B., Horstemeyer, S., & Horstemeyer, M. (2005). Fatigue Experiments, Damage Evolution and Multiscale Modeling for AA 7075-T651. Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental Mechanics. Portland, OR, United States: Society for Experimental Mechanics Inc.. 30(2), 139-152. [Abstract]

Solanki, K.N., Fang, H., & Horstemeyer, M. (2004). Comparisons of RBF and RSM for Crashworthiness. Proceedings of AmeriPAM 2004 User Conference. Troy, Michigan.

Solanki, K.N., Hammi, Y., Oglesby, D., & Horstemeyer, M. (2004). Implementation of Internal State Variable Material Model for Crashworthiness. Proceedings of AmeriPAM 2004 User Conference. Troy, Michigan.

Xue, Y., Jordon, J. B., & Horstemeyer, M. (2004). Multiscale Fatigue Modeling and Life Prediction for 7075-T651 Aluminum Alloy. Materials Damage Prognosis - Proceedings of a Symposium of the Materials Science and Technology 2004 Conference. New Orleans, LA: Minerals, Metals and Materials Society . 129-133. [Abstract]

Solanki, K.N., Oglesby, D., Fang, H., & Horstemeyer, M. (2003). Application of Multi-objective Statistics-based Methods for Crashworthiness Evaluation of Side-impact Finite Element Model. Proceedings of AmeriPAM 2003 User Conference. Troy, Michigan.

Non-Refereed Conference Posters
Walton, C. A., Martin, H. J., Horstemeyer, M., & Wang, P. (2012). Corrosion Modeling of Magnesium Alloys Using Internal State Variable. 2012 American Institute of Chemical Engineering Annual Meeting. Pittsburgh, PA.

Walton, C. A., Martin, H. J., Hicks, A., Danzy, J., Horstemeyer, M., & Wang, P. (2011). Comparing the Corrosion Effects of Environment and Form on Various Magnesium Alloys. 2011 American Institute of Chemical Engineers (AIChE) Annual Meeting. Minneapolis, MN.

Martin, H. J., Walton, C. A., Danzy, J., Horstemeyer, M., & Wang, P. (2010). Comparing Corrosion Mechanisms on Extruded AZ61 and AZ31 Exposed to Immersion and Salt Spray Environments. 2010 American Institute of Chemical Engineers (AIChE) Annual Meeting. Salt Lake City, UT.

Hossain, D., Tschopp, M. A., Ward, D. K., Bouvard, J.-L., Wang, P., & Horstemeyer, M. (2010). Atomistic Simulations of Deformation in Glassy Polyethylene. 10th Conference of Computational Chemistry and Material Sciences. Jackson State University, MS.

Articles in Trade Journals and Popular Press
Horstemeyer, M., & Bammann, D. (2010). Historical Review of Internal State Variable Theory for Inelasticity. International Journal of Plasticity. El Sevier. 26(9), 1310-1134. [Document]

Lee, S., Mao, Y., Gokhale, A. M., Harris, J., & Horstemeyer, M. (2009). Application of Digital Image Processing for Automatic Detection and Charaterization of Cracked Constituent Particles/inclusions in Wrought Aluminum Alloys. Materials Characterization. 60(9), 964-970.

Liu, W. K., Siad, L., Tian, R., Lee, S., Lee, D., Chen, W., Chan, S., Olson, G., Lindgen, L., Horstemeyer, M., Choi, J., & Kim, Y. J. (2008). Complexity Science of Multiscale Materials via Stochastic Computations. International Journal for Numerical Methods in Engineering. 80(6-7), 932-978.

Fang, H., Wang, Q., Tu, Y., & Horstemeyer, M. (2008). An Efficient Non-dominated Sorting Method for Evolutionary Algorithms. Evolutionary Computation. Publication. 16(3), 355-384.

Fang, H., & Horstemeyer, M. (2006). Global Response Approximation with Radial Basis Functions. Engineering Optimization. 38(4), 407-424.

Fang, H., & Horstemeyer, M. (2006). A Generic Optimizer Interface for Programming-free Optimization Systems. Advances in Engineering Software. 37(6), 360-369. [Abstract]

Potirniche, G., Hearndon, J., Horstemeyer, M., & Ling, X. W. (2006). Lattice Orientation Effects on Void Growth and Coalescence in Fcc Single Crystals. International Journal of Plasticity. Elsevier Ltd. 22(5), 921-942. [Abstract]

Potirniche, G., & Horstemeyer, M. (2006). On the Growth of Nanoscale Fatigue Cracks. Philosophical Magazine Letters. Taylor and Francis Ltd.. 86(3), 185-193. [Abstract]

Ling, X. W., Cherukuri, H. P., & Horstemeyer, M. (2006). A Hybrid Regularization Method for Inverse Heat Conduction Problems. International Journal for Numerical Methods in Engineering . 65(13), 2246-2264. [Document]

Johnston, G. P., Potirniche, G., Daniewicz, S., & Horstemeyer, M. (2006). Three-Dimensional Finite Element Simulations of Microstructurally Small Fatigue Crack Growth in 7075 Aluminum Alloy. Fatigue Fract Engng Mater Struct. 29, 597-605.

Lee, S. G., Patel, G. R., Gokhale, A. M., Sreeranganathan, A., & Horstemeyer, M. (2005). Variability in the Tensile Ductility of High Pressure Die Cast AM50 Mg Alloy. Scripta Materialia. Elsevier Ltd.. 53, 851-856. [Abstract]

Potirniche, G., Horstemeyer, M., Wagner, G. J., & Gullett, P. (2005). A Molecular Dynamics Study of Void Growth and Coalescence in Single Crystal Nickel. International Journal of Plasticity. Elsevier Ltd.. 22, 257-278. [Document]

Guo, Y. B., Wen, Q., & Horstemeyer, M. (2005). An Internal State Variable Plasticity-Based Approach to Determine Dynamic Loading History Effects on Material Property in Manufacturing Processes. International Journal Mechanical Sciences. Elsevier Ltd.. 47, 1423-1441. [Document]

Ling, X. W., & Horstemeyer, M. (2005). On Numerical Implementation of 3D Rate-dependent Single Crystal Plasticity. International Journal of Numerical Methods for Engineering. 63, 548-568. [Document]

Gall, K., Biallas, G., Maier, H. J., Gullett, P., Horstemeyer, M., & McDowell, D. L. (2004). In-Situ Observations of Low-Cycle Fatigue Damage in Cast AM60B Magnesium in an Environmental Scanning Electron Microscope. Metallurgical and Materials Transactions A. Minerals, Metals and Materials Society. 35(1), 321-331. [Abstract]

Liu, W., Gong, D., & Horstemeyer, M. (2004). Preface. Computational Methods in Applied Mechanics and Engineering. 193, 3-5.

Fang, H., & Horstemeyer, M. (2004). An Integrated Design Optimization Framework Using Object-oriented Programming. Collection of Technical Papers - 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, v 4, Collection of Technical Papers - 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Albany, NY, United States: American Institute of Aeronautics and Astronautics Inc.. 2213-2220. [Abstract]

Gall, K., Biallas, G., Maier, H. J., Gullett, P., Horstemeyer, M., McDowell, D. L., & Fan, J. (2004). In-Situ Obervations of High Cycle Fatigue Mechanisms in Cast AM60B Magnesium in Vacuum and Water Vapor Environments. International Journal Fatigue. Elsevier Ltd.. 26(1), 59-70. [Document]

Gall, K., Biallas, G., Maier, H. J., Horstemeyer, M., & McDowell, D. L. (2004). Environmentally Influenced Microstructurally Small Fatigue Crack Growth in Cast Magnesium. Materials Science and Engineering A, 396. Elsevier Ltd.. 153-154. [Document]

Yan, L., Khraishi, T. A., Shen, Y. L., & Horstemeyer, M. (2004). A Distributed-Dislocation Method for Treating Free-Surface Image Stresses in 3D Dislocation Dynamics Simulations. Modelling and Simulation in Materials Science and Engineering. 12(4), S289-S301. [Document]

Horstemeyer, M., Yang, N., Gall, K. A., McDowell, D. L., Fan, J., & Gullett, P. (2004). High Cycle Fatigue on a Die Cast AZ91E-T4 Magnesium Alloy. Acta Materialia. 52, 1327-1336. [Document]

Horstemeyer, M., Gall, K., Dolan, K. W., Waters, A., Haskins, J. J., Perkins, D. E., Gokhale, A. M., & Dighe, M. D. (2003). Numerical, Experimental, Nondestructive, and Image Analyses of Damage Progression in Cast A356 Aluminum Notch Tensile Bars. Theoretical and Applied Fracture Mechanics. 39(1), 23-45. [Abstract] [Document]

Horstemeyer, M., Gall, K. A., Dolan, K., Haskins, J., Gokhale, A. M., & Dighe, M. D. (2003). Numerical, Experimental, and Image Analyses of Damage Progression in Cast A356 Aluminum Notch Tensile Bars. Theoretical and Applied Fracture Mechanics. 39(1), 23-45. [Abstract]

Horstemeyer, M., & Wang, P. (2003). Cradle-to-Grave Simulation-Based Design Incorporating Multiscale Microstructure-Property Modeling: Reinvigorating Design with Science. Journal of Computer-Aided Materials Design. Springer Netherlands. 10(1), 13-34. [Abstract]

Fan, J., McDowell, D. L., Horstemeyer, M., & Gall, K. A. (2003). Cyclic Plasticity in Pores and Inclusions in Cast Al-Si Alloys. Engineering Fracture Mechanics. Elsevier Ltd.. 70(10), 1281-1302. [Document]

Mulholland, M. M., Ege, E. S., Khraishi, T. A., Horstemeyer, M., & Shen, Y. L. (2003). Cavity Mediated Strain Localization and Overall Ductility in Eutectic Tin-Lead Alloy. Materials Science and Engineering A, 360. Elsevier Ltd.. 160-168. [Document]

Balasundaram, A. K., Gokhale, A. M., Graham, S., & Horstemeyer, M. (2003). Three Dimensional Particle Cracking Damage Development in an Al-Mg Base Alloy. Materials Science and Engineering. Elsevier Ltd.. 355(1), 368-383. [Document]

Horstemeyer, M., Negrete, M., & Ramaswamy, S. (2003). Using a Micromechanical Finite Element Parametric Study to Motivate a Phenomenological Macroscale Model For Void/Crack Nucleation in Aluminum with a Hard Second Phase. Mechanics of Materials. 35, 675-687. [Document]

Horstemeyer, M., Baskes, M. I., Prantil, V. C., Philliber, J., & Vonderheide, S. (2003). A Multiscale Analysis of Fixed-End Simple Shear Using Molecular Dynamics, Crystal Plasticity, and a Macroscopic Internal State Variable Theory. Modeling and Simulation In Materials Science and Engineering. 11, 265-286. [Document]

McDowell, D. L., Gall, K., Horstemeyer, M., & Fan, J. (2003). Microstructure-Based Fatigue Modeling of Cast A356-T6 Alloy. Engineering Fracture Mechanics. Elsevier Ltd.. 70, 49-80. [Document]

Agarwal, H., Gokhale, A. M., Graham, S., & Horstemeyer, M. (2003). Void Growth in 6061 Al-Alloy under Triaxial Stress State . Materials Science and Engineering. Elsevier Ltd.. 341(1), 35-42. [Document]

Agarwal, H., Gokhale, A. M., Graham, S., & Horstemeyer, M. (2002). Anisotropy of Intermetallic Particle Cracking Damage Evolution in an Al-Si-Mg Base Wrought Aluminum Alloy Under Uniaxial Compression. Metallurgical and Materials Transactions-A: Physical Metallurgy and Materials Science. Minerals, Metals and Materials Society. 33(11), 3443-3448. [Abstract]

Horstemeyer, M., Yang, N., Gall, K. A., McDowell, D. L., Fan, J., & Gullett, P. (2002). High Cycle Fatigue Mechanisms in a Cast AM60B Magnesium Alloy. Fatigue and Fracture of Engineering Materials and Structures. Blackwell Science Ltd. 25(11), 1045-1056. [Abstract]

Balasundaram, A., Shan, Z., Gokhale, A. M., Graham, S., & Horstemeyer, M. (2002). Particle Rotations During Plastic Deformation of 5086 (O) Aluminum Alloy. Materials Characterization. Elsevier Science Inc.. 48(5), 363-369. [Abstract]

Horstemeyer, M., Baskes, M. I., Godfrey, A., & Hughes, D. A. (2002). A Large Deformation Atomistic Study Examining Crystal Orientation Effects on the Stress-Strain Relationship. International Journal of Plasticity. 18(2), 203-229. [Document]

Agarwal, H., Gokhale, A. M., Graham, S., Horstemeyer, M., & Bammann, D. (2002). Rotations of Brittle Particles During Plastic Deformation of Ductile Alloys. Materials Science and Engineering-A. Elsevier Ltd.. 328, 310-316. [Document]

Agarwal, H., Gokhale, A. M., Graham, S., & Horstemeyer, M. (2002). Quantitative Characterization of Three-Dimensional Damage Evolution in a Wrought Al-Alloy Under Tension and Compression. Metallurgical and Materials Transactions. New Orleans, LA, United States: Minerals, Metals and Materials Society. 33, 2599-2606. [Abstract]

Horstemeyer, M., Baskes, M. I., Hughes, D. A., & Godfrey, A. (2002). Orientation Effects on the Stress State of Molecular Dynamics Large Deformation Simulations. International Journal of Plasticity. 18, 203-209.

Horstemeyer, M., Osborne, R., & Penrod, D. (2002). Microstructure-Property Analysis and Optimization of a Control Arm. American Foundary Society. (2), 297-314.

Gerberich, W. W., Tymak, N. I., Grunlan, J. C., Horstemeyer, M., & Baskes, M. I. (2002). Interpretations of Indentation Size Effects. Journal of Applied Mechanics. 69(4), 443-452. [Document]

Horstemeyer, M., Lim, T. J., Lu, W. Y., Mosher, D. A., Baskes, M. I., Prantil, V. C., & Plimpton, S. J. (2002). Torsion/simple Shear of Single Crystal Copper. Journal of Engineering Materials and Technology. 124, 322-328. [Document]

Horstemeyer, M., Chandler, M., & PLIMPTON, S. J. (2001). Length Scale and Time Scale Effects on the Plastic Flow of Fcc Metals. Acta Materialia. Elsevier Ltd.. 49(20), 4363-4374. [Document]

Horstemeyer, M., Baskes, M. I., & Plimpton, S. J. (2001). Computational Nanoscale Plasticity Simulations Using Embedded Atom Potentials. Theoretical and Applied Fracture Mechanics. 37(1), 49-98. [Abstract]

Horstemeyer, M. (2001). Mapping Failure by Microstructure-Property Modeling. In J.J. Hoyt (Ed.), Journal of Metals. Minerals, Metals and Materials Society. 53(9). [Abstract]

Gall, K. A., Horstemeyer, M., Degner, B. W., McDowell, D. L., & Fan, J. (2001). On the Driving Force for Fatigue Crack Formation from Inclusions and Voids. International Journal of Fracture. 198(3), 207-233. [Abstract]

Horstemeyer, M., Plimpton, S. J., & Baskes, M. I. (2001). Size Scale and Strain Rate Effects on Yield and Plasticity of Metals. Acta Mater. 49, 4363-4374.

Fan, J., McDowell, D. L., Horstemeyer, M., & Gall, K. A. (2001). Computational Micro Mechanics Analysis of Cyclic Crack Tip Behavior for Microstructurally Small Cracks in Dual-Phase Al-Si Alloys. Engineering Fracture Mechanics. Elsevier Ltd.. 68(15), 1687-1706. [Document]

Gall, K. A., Horstemeyer, M., Schilfgaarde, M. V., & Baskes, M. I. (2000). Atomistic Simulations on the Tensile Debonding of an Aluminum-Silicon Interface. Journal of the Mechanics and Physics of Solids. Elsevier Ltd.. 48(10), 2183-2212. [Abstract]

Waters, A. M., Martz, H. E., Dolan, K. W., Horstemeyer, M., & Green, R. E., Jr. (2000). Three-Dimensional Statistical Void Analysis of AM60B Magnesium Using CT Imagery. Journal for American Society for Nondestructive Testing: Materials Evaluation. American Society for Nondestructive Testing. 58(10), 1221. [Abstract]

Dighe, M. D., & Horstemeyer, M. (2000). Effect of Strain Rate Effect on Damage Evolution in a Cast Al-Si-Mg Base Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Minerals, Metals and Materials Society. 31(7), 1725-1731. [Abstract]

Dighe, M. D., Mosher, D. A., Gokhale, A., & Horstemeyer, M. (2000). Effect of Strain Rate on Damage Evolution in a Cast Al-Si-Mg Base Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Minerals, Metals and Materials Society. 37(7), 1725-1731. [Abstract]

Horstemeyer, M. (2000). A Numerical Parametric Investigation of Localization and Forming Limits. International Journal of Damage Mechanics. SAGE Publications Ltd. 9, 255-285. [Abstract]

Gall, K., Yang, N., Horstemeyer, M., McDowell, D. L., & Fan, J. (2000). The Influence of Modified Intermettallics and Si Particles on Fatigue Crack Paths in a Commercial Cast A356 Al Alloy. Fatigue Frac. Eng. Mat. Struct. 23, 159-172.

Horstemeyer, M., & Ramaswamy, (2000). On Factors Affecting Localization and Void Growth in Ductile Metals: A Parametric Study. International Journal of Damage Mechanics. SAGE Publications Ltd. 9(1), 6-28. [Abstract]

Horstemeyer, M., Lathrop, J., Gokhale, A. M., & Dighe, M. (2000). Modeling Stress State Dependent Damage Evolution in a Cast Al-Si-Mg Aluminum Alloy. Theoretical and Applied Fracture Mechanics. Elsevier Science Publishers B.V.. 33(1), 31-47. [Abstract]

Gall, K., & Horstemeyer, M. (2000). Integration of Basic Materials Research into the Design of Cast Components by a Multi-Scale Methodology. of Engineering Materials and Technology. 122, 355-362.

Horstemeyer, M., Matalanis, M. M., Sieber, A. M., & Botos, M. L. (2000). Micromechanical Finite Element Calculations of Temperature and Void Configuration Effects on Void Growth and Coalescence. International Journal of Plasticity. Elsevier Ltd.. 16. [Document]

Gall, K. A., Horstemeyer, M., McDowell, D. L., & Fan, J. (2000). Finite Element Analysis of the Stress Distributions near Damaged Si Particle Clusters in Cast Al-Si Alloys. Mechanics of Materials 32. Elsevier Ltd.. 5, 277-301. [Document]

Gall, K., Yang, N., Horstemeyer, M., McDowell, D. L., & Fan, J. (1999). The Debonding and Fracture of Si Particles During the Fatigue of a Cast Al-Si Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Minerals, Metals and Materials Society. 30, 3079-3088. [Abstract]

Horstemeyer, M., McDowell, D. L., & McGinty, R. (1999). Design of Experiments for Constitutive Model Selection: Application to Polycrystal Elastoviscoplasticity. Modelling and Simulation in Materials Science and Engineering. 7, 253-273. [Document]

Horstemeyer, M., & Gokhale, A. M. (1999). A Void Nucleation Model for Ductile Materials. International Journal of Solids and Structures. Elsevier Ltd.. 36, 5029-5055. [Document]

Horstemeyer, M. (1998). Damage Influence on the Bauschinger Effect of a Cast A356 Aluminum Alloy. Scripta Materialia. Elsevier Ltd.. 39(11), 1491-1495. [Abstract]

Lu, W. Y., Horstemeyer, M., Korellis, J. S., Grishabar, R. B., & Mosher, D. (1998). High Temperature Sensitivity of Notched AISI 304L Stainless Steel Tests. Theoretical and Applied Fracture Mechanics. Elsevier Ltd.. 30(2), 139-152. [Abstract]

Lu, W. Y., Horstemeyer, M., Korellis, J., Grishibar, R., & Mosher, D. (1998). High Temperature Effects in 304L Stainless Steel Notch Tests. Theoretical and Applied Fracture Mechanics. Elsevier Sci B.V.. 30(2), 139-152. [Abstract]

Horstemeyer, M., & Baskes, M. I. (1998). Atomistic Finite Deformation Simulations: A Discussion on Length Scale Effects in Relation to Mechanical Stresses. Journal of Engineering Materials and Technology, Transactions of the ASME. 121(2), 114-119. [Abstract]

Dighe, M. D., Gokhale, A. M., & Horstemeyer, M. (1998). Effect of Temperature on Silicon Particle Damage in Cast Microstructure of A356 Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Minerals, Metals and Materials Society. 29(3), 905-908. [Abstract]

Horstemeyer, M., & McDowell, D. L. (1998). Modeling Effects of Dislocation Substructure in Polycrystal Elastoviscoplasticity. Mechanics of Materials . 27, 145-163. [Document]

Horstemeyer, M., & Revelli, V. (1997). Stress History Dependent Localization and Failure Using Continuum Damage Mechanics Concepts. In D. L. McDowell (Ed.), Application of Continuum Damage Mechanics to Fatigue and Fracture. Orlando, FL, USA: ASTM. [Abstract]

Horstemeyer, M., & Staab, G. (1990). Interface Debonding in Fatigue Cycling of Glass Reinforced Composites. Journal of Reinforced Plastics and Composites. 9(5), 446-455.

Mulholland, M., Khraishi, T., Shen, Y. L., & Horstemeyer, M. (). Void Growth and Interaction Experiments: Implications to the Optimal Straining Rate in Superplastic Forming. International Journal of Plasticity. Elsevier Ltd.. 22(9), 1728-1744. [Document]

Fang, H., & Horstemeyer, M. (). HIPPO: An Object Oriented Framework for General Purpose Design Optimization. J. Aerospace Computing, Information, nad Communication. 2, 490.

Houze, J., Kim, S., Park, S. J., German, R., Horstemeyer, M., & Kim, S. (). Atomistic Simulations of Activated Sintering of Tungsten by Additives. Advances in Powder Metallurgy and Particulate Materials. 70-75.

Hammi, Y., Horstemeyer, M., & Bammann, D. (). An Anisotropic Damage Model for Ductile Metals. International Journal of Damage Mechanic. 12(3), 245-262.

Querin, J., Schneider, J. A., & Horstemeyer, M. (). Analysis of Micro Void Formation at Grain Boundary Triple Points in Monotonically Strained AA6022-T43 Sheet Metal. Materials Science and Engineering A. 101-106.

In-House
Carino, R.L., & Horstemeyer, M. (2014). MEAM Parameter Calibration (MPC) Software. Engineering Virtual Organization for CyberDesign. Mississippi State University: Center for Advanced Vehicular Systems. [Abstract] [Document Site]

Ren, X., Horstemeyer, M., Solanki, K.N., & Wang, P. (2007). Compare the Side Door Thickness Designs: Injury-based Design and Energy-absorb Design. CAVS Report MSU.CAVS.CMD.2007-R0017.

Horstemeyer, M., Bammann, D., Marin, E., Solanki, K.N., Groh, S., & Ren, X. (2007). DOE/SRCLID FY 2006-2007. CAVS Report MSU.CAVS.CMD.2007-R0041.

Solanki, K.N., Rais-Rohani, M., Acar, E., Eamon, C., & Horstemeyer, M. (2007). Reliability-Based Design Optimization Using a Physically Motivated Material Model. CAVS Report MSU.CAVS.CMD.2007-R0023. [Abstract]

Wang, L., Felicelli, S. D., Wang, P., & Horstemeyer, M. (2007). Thermal Modeling and Experimental Validation in the LENSTM Process. CAVS Report #MSU.CAVS.CMD.2007-R0021. Center for Advanced Vehicular Systems, Mississippi State, MS.

Hearndon, J., Potirniche, G., Wang, P., & Horstemeyer, M. (2007). A Two-dimensional Damaged Finite Element for Fracture and Fatigue Applications. CAVS Internal Report, MSU.CAVS.CMD.2007-R0025. Center for Advanced Vehicular Systems, MSU.

Horstemeyer, M., Oglesby, D., Fan, J., Gullett, P., El Kadiri, H., Xue, Y., Burton, C., Gall, K., Jelinek, B., Jones, M. K., Kim, S., Marin, E., McDowell, D. L., Oppedal, A. L., & Yang, N. (2007). From Atoms to Autos: Designing a Mg Alloy Corvette Cradle by Employing Hierarchical Multiscale Microstructure-Property Models for Monotonic and Cyclic Loads. USCAR_ MSU.CAVS.CMD.2007-R0001.

Carrasquel, I., Burton, C., Horstemeyer, M., & Solanki, K.N. (2006). Dodge Neon Microstructure-Property Characterization. CAVS Report MSU.CAVS.CMD.2006-R0002.

Wang, L., Felicelli, S. D., Wang, P., & Horstemeyer, M. (2006). Numerical Simulation of the Temperature Distribution and Microstructure Evolution in the LENSTM Process. CAVS Report #MSU.CAVS.CMD.2006-R0014. Center for Advanced Vehicular Systems, Mississippi State, MS.

Wang, L., Felicelli, S. D., Wang, P., & Horstemeyer, M. (2006). Study of Heat Transfer Mechanisms during the LENSTM Process. CAVS Report #MSU.CAVS.CMD.2006-R0009. Center for Advanced Vehicular Systems, Mississippi State, MS.

Fang, H., Solanki, K.N., & Horstemeyer, M. (2004). Multi-Objective Crashworthiness Optimization for Side and Roof Impacts. CAVS Report MSU.CAVS.CMD.2004-R0003.

Solanki, K.N., & Horstemeyer, M. (2004). Crashworthiness Research Overview: PAM-CRASH. CAVS Report MSU.CAVS.CMD.2004-R0002.

Fang, H., Oglesby, D., Solanki, K.N., & Horstemeyer, M. (2003). Crashworthiness Optimization - Methodologies and Applications. CAVS Report MSU.CAVS.CMD.2003-R0002.

Oglesby, D., Marin, E., Horstemeyer, M., & Ren, X. (). MSU.CAVS.CMD.2007-R0014: Review of the Role of ABAQUS in CAVS Research. Center for Advanced Vehicular Systems, MSU.

Technical Report
Ma, Q., Marin, E., Hammi, Y., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). On Predicting the Channel Die Compression Behavior of HCP Magnesium AM30 Using Crystal Plasticity FEM. CAVS REPORT, MSU.CAVS.CMD.2011-R004: CAVS, MSU.

Tang, T., Kim, S., Horstemeyer, M., & Wang, P. (2011). Atomistic Modeling of Crack Growth in Magnesium Single Crystal. CAVS.CMD.2010-R0005: Center for Advanced Vehicular Systems (CAVS), Missippi State University.

Tang, T., Kim, S., & Horstemeyer, M. (2010). Fatigue Crack Growth in Magnesium Single Crystals under Cyclic Loading: Molecular Dynamics Simulation. CAVS. REPORT, CMD.2010-R0004: Center for Advanced Vehicular Systems (CAVS), MSU.

Horstemeyer, M., Farkas, D., Kim, S., Tang, T., & Portirniche, G. (2010). Nanostructurally Small Cracks (NSC): A Review on Atomistic Modeling of Fatigue. CAVS. Report, CMD.2010-R0003: Center for Advanced Vehicular Systems (CAVS), MSU.

Ciorba, F. M., Groh, S., & Horstemeyer, M. (2010). Early Experiences and Results on Parallelizing Discrete Dislocation Dynamics Simulations on Multi-Core Architectures. MSU.CAVS.CMD.2010-R0002. Mississippi State University: CAVS. [Abstract] [Document]

Antonyraj, A., Morgan, W., Marin, E., Wang, P., & Horstemeyer, M. (2009). Microstructural Studies on Deformation and Damage Mechanisms in Thermoplastics. Mississippi State University: CAVS report, MSU.CAVS.CMD.2009-R0025.

Marin, E., Wang, P., Horstemeyer, M., Bouvard, J.-L., Antonyraj, A., Rhee, H., Carino, R.L., Oglesby, D., Poe, R. W., Ponder, S., Francis, D.K., Cranford, P., Eady, C., Drake, D., & Brown, H. (2009). Material Database and Material Model Development for Polymeric Materials: Final Report. MSU.CAVS.CMD.2009-R0024: CAVS.

Bouvard, J.-L., Ward, D. K., Hossain, D., Nouranian, S., Marin, E., & Horstemeyer, M. (2009). Review of Hierarchical Multiscale Modeling to Describe the Mechanical Behavior of Amorphous Polymers. Internal report for Center for Advanced Vehicular Systems (CAVS). MSU.CAVS.CMD.2009-R0002: Center for Advanced Vehicular Systems (CAVS).

Horstemeyer, M., Carino, R.L., Hammi, Y., & Solanki, K.N. (2009). MSU Internal State Variable Plasticity-Damage Model 1.0 Calibration, DMGfit Production Version Users Manual. MSU.CAVS.CMD.2009-R0010. Mississipi State University: CAVS. [Abstract]

Kim, S., Horstemeyer, M., Rhee, H., Kim, S., Zhang, S., Olson, G., & Han, Q. (2009). Materials Design for Mg Alloys. CAVS REPORT, MSU.CAVS.CMD. CAVS: CAVS. 2009, R0029.

Marin, E., El Kadiri, H., Lowry, A., Wang, P., & Horstemeyer, M. (2008). MSU.CAVS.CMD.2008-R002: Modeling the Hot Forging of Nickel-Based Superalloys: IN718 and IN718Plus. [Abstract]

Marin, E., Nouranian, S., Prabhu, R., & Horstemeyer, M. (2007). On Developing a Viscoelastic-Viscoplastic Model for Polymeric Materials. Internal report for Center for Advanced Vehicular Systems (CAVS). MSU.CAVS.CMD.2007-R0015: Center for Advanced Vehicular Systems (CAVS).

Carino, R.L., Horstemeyer, M., & Burton, C. (2007). Re-engineering DMGFIT - Fitting Material Constants to Internal State Variable Models. MSU.CAVS.CMD.2007-R0040. Mississipi State University: CAVS. [Abstract]

Horstemeyer, M., Fan, J., & McDowell, D. L. (2001). From Atoms to Autos: Part 2 Fatigue Modeling, SAND2001-8661.

Horstemeyer, M. (2001). "From Atoms to Autos: Part 1 Microstructure-Property Modeling, SAND2001-8662.

Gall, K., Diao, J., Dunn, M. L., Gullett, P., Horstemeyer, M., Miller, D. C., McDowell, D. L., Spark, K., Talmage, M. J., West, N., & Zimmerman, J. A. (). Atomistic Modeling of Nanowires, Small-scale Fatigue Damage in Cast Magnesium, and Materials for MEMS. SAND2006-6180. Sandia National Laboratories, Albuquerque.

Web Publications
Nouranian, S., Gwaltney, S. R., Baskes, M. I., Tschopp, M. A., & Horstemeyer, M. (2016). On Stress-Strain Responses and Young's Moduli of Single Alkane Molecules, A Molecular Mechanics Study Using the Modified Embedded-Atom Method. Arxiv ID: 1605.01896.

Nouranian, S., Tschopp, M. A., Gwaltney, S. R., Baskes, M. I., & Horstemeyer, M. (2014). An Interatomic Potential For Saturated Hydrocarbons Based on the Modified Embedded-Atom Method. arXiv Preprint:1305.2759v7 [physics.chem-ph] (Physical Chemistry Chemical Physics). [Abstract] [Document Site]

Professional Presentations
Paliwal, B., Hammi, Y., Moser, R. D., & Horstemeyer, M. (2016). Efficient Return Mapping Implicit Integration of a New Three-invariant, Non-associated, Cap-Plasticity Damage Model with Highly Non-linear Hardening for Cementitious Materials. 2016 International Mechanical Engineering Congress and Exposition (ASME). Phoenix, AZ.

Paliwal, B., Lawrimore, W., Chandler, M. Q., & Horstemeyer, M. (2016). Molecular Dynamics Informed Nano-mechanical Modeling of Interfaces of PolyVinyl Alcohol (PVA)/Clay Nanocomposite. 2016 International Mechanical Engineering Congress and Exposition (ASME). Phoenix, AZ.

Prabhu, R., Mao, Y., Marin, E., Williams, L. N., Liao, J., & Horstemeyer, M. (2012). Novel Simulation-Based Analysis of the Biomechanics of Blast-Related Traumatic Brain Injury (bTBI). BMES 2012 Annual Meeting. Atlanta, GA. [Document]

Bouvard, J.-L., Tschopp, M. A., Marin, E., Bammann, D., & Horstemeyer, M. (2011). Development of a Multiscale Strategy to Predict the Material Response of Polymers. ASME 2011. Denvers, CO.

Stone, T.W., Asafa, O. A., Tschopp, M. A., Gullett, P., & Horstemeyer, M. (2011). Molecular Dynamics Study of Frictional Effects on the Compaction of Metal Nanoparticles. Material, Science and Technology (MS&T) Conference. Columbus, OH. (2011).

Tschopp, M. A., Solanki, K.N., Rhodes, N., Horstemeyer, M., Gao, F., Sun, X., & Khaleel, M. (2011). Effect of Grain Boundary Character on the Segregation of Point Defects and Impurities to Grain Boundaries in Fe. TMS MS&T 2011; Columbus, OH.

Tschopp, M. A., Solanki, K.N., & Horstemeyer, M. (2011). A Generalized Framework for Quantifying Grain Boundary Structure-Property Relationships at the Nanoscale. TMS MS&T 2011; Columbus, OH.

Tang, T., Kim, S., & Horstemeyer, M. (2011). Atomistic Modeling of Fatigue Fracture Behavior in Magnesium Single Crystals. 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN.

Bouvard, J.-L., Solanki, K.N., Tschopp, M. A., Bammann, D., & Horstemeyer, M. (2011). Multiscale Modeling of Amorphous Polymers: from Molecular Dynamic Simulations to Continuum Models. USNCCM 2011. Minneapolis, MN.

Baskes, M., Jelinek, B., Groh, S., Moitra, A., Horstemeyer, M., Houze, J., Kim, S., & Wagner, G. (2011). New MEAM Potentials for the Al, Si, Mg, Cu, and Fe Alloy System. 2011 NIST Workshop on Atomistic Simulations for Industrial Needs. Gaithersburg, MD: NIST. [Document] [Document Site]

Bouvard, J.-L., Tschopp, M. A., Bouvard, C., Denton, B., & Horstemeyer, M. (2011). Simulation of Impact Tests on Polycarbonate at Different Strain Rates and Temperatures. SEM 2011 proceedings. Uncasville, CT.

Horstemeyer, M., Farkas, D., Kim, S., Tang, T., & Potirniche, G. (2011). Nanostructurally Small Cracks (NSC): A Review on Atomistic Modeling of Fatigue. 2011 TMS Annual Meeting & Exhibition, San Diego, CA.

Tang, T., Jordon, J. B., Horstemeyer, M., & Wang, P. (2011). Stress Intensity Factor Solutions for Friction Stir Spot Welds of Magnesium AZ31 Alloy. 2011 TMS Annual Meeting & Exhibition, San Diego, CA.

Lugo, M., Jordon, J. B., Horstemeyer, M., & Tschopp, M. A. (2011). Microstructural Relationship in the Damage Evolution Process of an AZ61 Magnesium Alloy. TMS 2011; San Diego, CA.

Li, B., Zhang, X. Y., El Kadiri, H., & Horstemeyer, M. (2011). Twinning without a Twinning Plane. TMS Annual Meeting. San Diego: TMS.

Kim, S., El Kadiri, H., & Horstemeyer, M. (2011). Nucleation Mechanism for Shuffling Dominated Twinning in Magnesium. 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]

Tang, T., Kim, S., Horstemeyer, M., & Wang, P. (2011). A Molecular Dynamics Study of Frature Behavior in Magnesium Single Crystal. 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]

Asle Zaeem, M., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). A Phase-Field Model for Recrystallization Grain Growth: Effects of Grain Boundary Energy Anisotropy and Second-Phase Particles. TMS 2011 Annual Meeting & Exhibition. [Abstract]

Baird, J., El Kadiri, H., Oppedal, A. L., Horstemeyer, M., & Vogel, S. C. (2011). Non-Schmid Effects of {10-12} Twinning and and Non-Basal Slip in Magnesium. 2011 TMS Annual Meeting & Exposition. San Diego, CA.

Tschopp, M. A., Bouvard, J.-L., Ward, D. K., & Horstemeyer, M. (2011). Atomic Scale Deformation Mechanisms of Amorphous Polyethylene under Tensile Loading. TMS 2011; San Diego, CA. [Document]

Kim, S., Kim, S., & Horstemeyer, M. (2011). Vanadium Effects on a BCC Iron 3(111)[1-10] Grain Boundary Strength. 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]

Tschopp, M. A., Solanki, K.N., Baskes, M. I., Horstemeyer, M., Gao, F., Sun, X., & Khaleel, M. (2011). Towards a Unified Framework for Interatomic Potential Development: Application to Fe-He System. TMS 2011; San Diego, CA. [Document]

Tschopp, M. A., Horstemeyer, M., Gao, F., Sun, X., & Khaleel, M. (2010). Influence of Grain Boundary Character on Point Defect Formation Energies in BCC Iron. TMS MS&T 2010. [Document]

Tschopp, M. A., & Horstemeyer, M. (2010). Computational Framework for Assessing Grain Boundary Structure-Property Relationships at Nanoscale. TMS MS&T 2010. [Document]

Brown, H., Bouvard, J.-L., Oglesby, D., Marin, E., Antonyraj, A., Toghiani, H., Wang, P., & Horstemeyer, M. (2010). Mechanical Behavior and Fatigue Studies of Rubber Component in Army Tracked Vehicles. GVSETS 2010, Dearborn, MI.

Tschopp, M. A., Baskes, M. I., Solanki, K.N., Horstemeyer, M., Gao, F., Sun, X., & Khaleel, M. (2010). MEAM Interatomic Potential Generation: Coupling with MATLAB. NIST Symposium on Atomistic Simulations for Industrial Needs, Gaithersburg, MD. [Document]

Bouvard, J.-L., Ward, D. K., Marin, E., Bammann, D., & Horstemeyer, M. (2010). Development of an Internal State Variable Model to Describe the Mechanical Behavior of Amorphous Polymer and Its Application to Impact Testing. , SEM 2010-Mechanics of Time-Dependent Materials Symposia, Indianapolis.

Hammi, Y., Stone, T.W., Allison, P., & Horstemeyer, M. (2010). Fatigue Modeling of a Powder Metallurgy Main Bearing Cap. 2010 SIMULIA Customer Conference. Providence, RI: 3DS SIMULIA. [Abstract]

Tschopp, M. A., & Horstemeyer, M. (2010). Structure-Property Relationships at the Atomistic Scale: Applications to Metals and Polymers. Pacific Northwest National Laboratory (4/26), Washington State University (4/28). [Abstract]

Bouvard, J.-L., Oglesby, D., Solanki, K.N., Antonyraj, A., Toghiani, H., Tschopp, M. A., Kirkland, R., Horstemeyer, M., Wang, P., & King, R. (2010). Aging, Endurance and Wear of Elastomers And Other Soft Materials: Mississippi State Case Study. Michelin Forum. Greenville, SC.

Bouvard, J.-L., Marin, E., Oglesby, D., Solanki, K.N., Antonyraj, A., Horstemeyer, M., Wang, P., & King, R. (2010). Aging, Endurance and Wear of Elastomers. Materials: Models and Methods Forum. South Carolina.

Tang, T., Kim, S., & Horstemeyer, M. (2010). Atomistic Simulations of Fatigue Crack Growth and the Influence of Temperature on Fatigue Behavior in Magnesium Crystals. Proceedings of 2010 TMS Annual Meeting & Exhibition, Seattle, Washington, USA.

Tang, T., Kim, S., & Horstemeyer, M. (2009). Atomistic Modeling of Fatigue Crack Growth in Magnesium Single Crystal under Cyclic Loading. 2009 ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida.

Antonyraj, A., Adcock, B., Haeney, D. F., Wang, P., & Horstemeyer, M. (2009). Effect of Additives on Sintering Response of Titanium by Powder Injection Molding. MIM, California. Int. Conf. Injection Molding of Metals, Ceramics and Carbide. [Document]

Bouvard, J.-L., Marin, E., Horstemeyer, M., Ward, D. K., & Bammann, D. (2009). Experimental Testing and Numerical Model of Thermoplastics: PC, PP, and ABS. Marseille, France: CFM09.

Groh, S., Marin, E., Horstemeyer, M., & Zbib, H. (2009). Multiscale Modeling of the Plasticity in an Al Single Crystal. USNCCM 09. Columbus, Ohio.

Marin, E., & Horstemeyer, M. (2009). Introduction to the Finite Element Method: A Practical Course. Engineering Engagement Workshop. MS: CAVS Extension, Canton, June 2-3, 2009. [Abstract]

Kim, S., Houze, J., Kim, S., & Horstemeyer, M. (2009). Vanadium Diffusion in Ferrite. Pittsburgh, Pennsylvania.

Houze, J., Jelinek, B., Kim, S., Kim, S., & Horstemeyer, M. (2009). Verification and Refinement of the Al-Mg-Zn Phi Phase Crystal Structure Model. Pittsburgh, Pennsylvania.

Liyanage, Laalitha S. I., Kim, S., Houze, J., Horstemeyer, M., & Kim, S. (2009). An Ab Initio Study of the Crystal Structure of the Tau-phase in Al-Mg-Zn Alloys. Pittsburgh, Pennsylvania. [Document Site]

Wang, L., Pratt, P., Felicelli, S. D., El Kadiri, H., Wang, P., & Horstemeyer, M. (2009). Experimental Analysis of Porosity Formation in Laser-assisted Powder Deposition Process. 2009 TMS Annual Meeting & Exhibition, Materials Issues in Additive Powder-Based Manufacturing Processes, San Francisco, CA.

Rhee, H., Hwang, Y., Park, S. J., & Horstemeyer, M. (2009). Investigation on the Compressive Behavior of Turtle's Shell: Experiment, Modeling, and Simulation. TMS 2009, San Francisco, CA, USA, February 15-19, 2009.

Groh, S., Marin, E., Horstemeyer, M., & Bammann, D. (2009). Dislocation Motion in Magnesium: a Study by Molecular Static and Molecular Dynamics. Plasticity 09. St Thomas, Virgin Island.

Prabhu, R., Adams, D., Whittington, W. R., Tucker, M.T., Marin, E., Horstemeyer, M., Begonia, M., Williams, L. N., & Liao, J. (2008). Traumatic Brain Injury: Mechanical Response of Procine Brain Tissue under High Strain Rate Tests. Modeling & Simulation, Testing & Validation Conference. Sterling Heights, MI.

Hammi, Y., Allison, P., Stone, T.W., Tucker, L., & Horstemeyer, M. (2008). Pressure-Dependent Plasticity Model for Powder Metallurgy Compaction. First American Academy of Mechanics Conference. New Orleans, June 17-20 2008.

Horstemeyer, M. (2008). Bridging Atomistics and Continuum Mechanics and Associated Length Scale Issues. American Academy of Mechanics. New Orleans, LA.

Hammi, Y., Stone, T.W., Tucker, L., Allison, P., Horstemeyer, M., & Marin, E. (2008). Modeling for Powder Metallurgy Component Design and Performance Prediction. MPIF/APMI 2008 World Congress on Powder Metallurgy & Particulate Materials . Washington, DC, June 8-12 2008. [Abstract]

Bouvard, J.-L., Xue, Y., Taylor, P., Marin, E., Horstemeyer, M., & Oglesby, D. (2008). On the Mechanical Characterization of Thermoplastic Polyurethane: Testing and Modeling. Monterey, CA.

Jelinek, B., Houze, J., Kim, S., Moitra, A., Liyanage, Laalitha S. I., Horstemeyer, M., & Kim, S. (2008). Development of the EAM Potential for Fe-C Alloy Systems. The American Physical Society, March 10-14, 2008. New Orleans, La.. [Abstract] [Document Site]

Liyanage, Laalitha S. I., Jelinek, B., Kim, S., Horstemeyer, M., & Kim, S. (2008). Calculation of Absorption Energies Using EAM Potential for Al-Mg Alloy Systems. The American Physical Society, March 10-14, 2008. New Orleans, La.. [Document Site]

Moitra, A., Kim, S., Houze, J., Jelinek, B., Liyanage, Laalitha S. I., Horstemeyer, M., & Kim, S. (2008). Embedded Atom Method (EAM) Interatomic Potential for Zinc (Zn). The American Physical Society, March 10-14, 2008. New Orleans, La..

Wang, P., Felicelli, S. D., Horstemeyer, M., Wang, L., Xue, Y., El Kadiri, H., & Potirniche, G. (2008). Simulation-Based Integration of Rapid Solidification to Fatigue Prognostic Predictions Using Laser-Deposited High Strength Materials as an Example. 9th Global Innovations Symposium: Trends in Integrated Computational Materials Engineering for Materials Processing and Manufacturing: Session II, 2008 TMS Annual Meeting & Exhibition, . New Orleans, LA.

Horstemeyer, M., & Solanki, K.N. (2008). Physically Motivated Uncertainty-Based Higher Order Damage Model. The 14th International Symposium on Plasticity. Kailua/Kona, Hawaii, January 3-8, 2008.

Rhee, H., Tucker, M.T., Horstemeyer, M., & Hwang, Y. (2007). Structures and Mechanical Behavior of Lightweight Composite Foam Materials. Materials Science and Technology (MS&T) 2007 Conference and Exhibition. Detroit, Mi.

Groh, S., Jelinek, B., Kim, S., Kim, S., & Horstemeyer, M. (2007). From Individual Properties of Dislocation to Collective Properties of Dislocations. USNCCM9. San Francisco, Ca.

El Kadiri, H., Wang, L., Felicelli, S. D., Horstemeyer, M., & Wang, P. (2007). Transformations in Laser Multi-deposited Medium Carbon Steel. Advances in Microstructure-based Modeling and Characterization of Deformation Microstructures. Orlando, FL: TMS (The Minerals, Metals & Materials Society).

Moitra, A., Kim, S., Kim, S., Park, S. J., Horstemeyer, M., & German, R. (2007). Linkages Between Atomisitc and Continuum-Based Simulations in Nanoscale Powder Metallurgy. The Minerals, Metals and Materials Society 136th Meeting. Orlando, FL.

Oglesby, D., & Horstemeyer, M. (2007). Multiscale Analysis of a Magnesium Corvette Engine Cradle. Bost Extension Center, Campus of Mississippi State University.

Rhee, H., Hwang, Y., Liyanage, Laalitha S. I., & Horstemeyer, M. (2006). Multiscale Structures and Mechanical Behavior of a Biological Composite Material: Turtle Shell. 2006 Materials Research Society (MRS) Fall Meeting. Boston, MA.

Wang, L., Felicelli, S. D., Gooroochurn, Y., Wang, P., & Horstemeyer, M. (2006). Numerical Simulation of the Temperature Distribution and Microstructure Evolution in the LENS Process. The Seventeenth Solid Freeform Fabrication Symposium. Austin, TX. [Document]

El Kadiri, H., & Horstemeyer, M. (). Transient Oxidation and Interfacial Cavitation Upon Selective Oxidation. In MS&T 2007 Symposium: Oxidation and Diffusion, chaired by David R. Clarke (Eds.), Detroit, Mi.

Patents and Licenses
Horstemeyer, S., Wang, P., Horstemeyer, M., Malley, R., & Marin, E. (2015). Methods and Systems for Extrusion. Patent No. 2015/0047405. US. [Abstract]

Horstemeyer, M. (2014). Shock Mitigating Materials and Methods Utilizing Spiral Shaped Elements. Patent No. 2014/0026279.

Horstemeyer, M., Wang, P., Felicelli, S. D., El Kadiri, H., Berry, J., & Bammann, D. (2007). LENS Modeling System Modification 5, $1.65MM,.

Horstemeyer, M., Park, S. J., German, R., Kim, S., & Kim, S. (2007). Atomistic Sintering Simulation Software. Mississippi State University.

Horstemeyer, M., Marin, E., Oglesby, D., Hammi, Y., & Solanki, K.N. (2007). A Software Code Contains Uncertainty-Based Internal State Variable Material Model with Structure-Property Relationships. Mississippi State University.

Horstemeyer, M., Horstemeyer, S., Dill, R. M., & Cuicchi, R. (2007). Method and Apparatus for Testing a Toy Bumper Designed for Increased Passenger Safety Using Newton's Laws of Motion. Mississippi State University.

Thesis and Dissertation
Horstemeyer, M. (1995). Physically-Motivated Modeling of Deformation-Induced Anisotropy. Georgia Institute of Technology: Georgia Institute of Technology.

Horstemeyer, M. (1987). The Determination of Failure Mechanisms in the Fatiguing of Unidirectional Composites by Acoustic Emission. Ohio State University: Ohio State University.